QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

2 – Command Line Interface UsageDownloading and Uploading FilesSDownloading and Uploading FilesThere are several files that reside on the I/O module that you can download to theworkstation for examination or for safekeeping. These files include the following:• Backup configuration file (configdata)• Log files (logfile)• Support files (dump_support.tgz)You can upload firmware image files or backup configuration files to the I/Omodule to reinstall firmware or restore a corrupted configuration. The I/O moduleuses FTP to exchange files between the I/O module and the workstation.• Refer to “Installing Firmware” on page 5-16 for information about installingfirmware.• Refer to “Back Up and Restore an I/O Module Configuration” on page 5-12for information about backing up and restoring an I/O module configuration.• Refer to “Creating and Downloading a Log File” on page 9-8 for informationabout creating a log file.• Refer to “Creating a Support File” on page 2-6 for information about creatinga support file.To download a file from the I/O module to the workstation, do the following:1. Enter the FTP command and the I/O module IP address or symbolic name.>ftp 192.168.70.1292. When prompted for a user and password, enter the FTP account name andpassword (images, images).user: imagespassword: images3. Set binary mode and use the Get command to download the file(configdata).ftp>binftp>get configdataxxxxx bytes sent in xx secs.ftp>quit2-8 59245-01 A