QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Config PortSExamples The following is an example of the Set Config Port command for external port 0:QLogic8GbT #> admin startQLogic8GbT (admin) #> config editQLogic8GbT (admin-config) #> set config port 0A list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Configuring Port Number: 0------------------------AdminState (1=Online, 2=Offline, 3=Diagnostics, 4=Down) [Online]LinkSpeed (1=1Gb/s, 2=2Gb/s, 4=4Gb/s, 8=8Gb/s, A=Auto) [Auto ]PortType (TH / TF) [TF ]SymPortName (string, max=32 chars) [Port0 ]Finished configuring attributes.This configuration must be saved (see config save command) andactivated (see config activate command) before it can take effect.To discard this configuration use the config cancel command.The following is an example of the Set Config Port command for internal port 1:QLogic8GbT #> admin startQLogic8GbT (admin) #> config editQLogic8GbT (admin-config) #> set config port 1A list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Configuring Port Number: 1------------------------AdminState (1=Online, 2=Offline, 3=Diagnostics, 4=Down) [Online] offlineLinkSpeed (2=2Gb/s, 4=4Gb/s, 8=8Gb/s, A=Auto) [2Gb/s ]PrimaryTFPortMap (decimal value for port, N=no mapping) [0 ]BackupTFPortMap (decimal value for port, N=no mapping) [15 ]SymPortName (string, max=32 chars) [Port1 ]Finished configuring attributes.This configuration must be saved (see config save command) andactivated (see config activate command) before it can take effect.To discard this configuration use the config cancel command.QLogic8GbT (admin-config) #> config saveQLogic8GbT (admin-config) #> config activate12-68 59245-01 A