QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Config PortSTable 12-13. Port Configuration ParametersParameterAdminStateLinkSpeedPortTypeDescriptionPort administrative state:• Online – Activates and prepares the port to send data.This is the default.• Offline – Prevents the port from receiving signal andaccepting a device login.• Diagnostics – Prepares the port for testing and preventsthe port from accepting a device login.• Down – Disables the port by removing power from theport lasers.Transmission speed:• TF_Ports: 1-Gbps, 2-Gbps, 4-Gbps, 8-Gbps, or Auto.The default is Auto. Setting a port to 1-Gbps that has an8-Gbps SFP will down the port.• TH_Ports: 2-Gbps, 4-Gbps, 8-Gbps, or Auto. The defaultis 2Gb/s.Port type for external ports:• TF–Transparent Fabric port connects to Fibre Channelswitches that support NPIV.• TH–Transparent Host port connects to an HBA. TH_Portsare mapped to TF_Ports.The default for external ports is TF. All internal ports areTH_Ports.12-66 59245-01 A