QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A2 – Command Line Interface UsageCreating a Support FileIf your workstation does not have an FTP server, enter the Create Supportcommand to create the support file, and use FTP to download the support filefrom the I/O module to your workstation as shown in the following example:QLogic8GbT #> create supportLog Msg:[Creating the support file - this will take several seconds]FTP the dump support file to another machine? (y/n): nTo download the support file from the I/O module to the workstation, do thefollowing:1. Open a terminal window and move to the directory where you want todownload the support file.2. Enter the FTP command and the I/O module IP address or symbolic name.>ftp 10.0.0.13. When prompted for a user and password, enter the FTP account name andpassword (images, images).user: imagespassword: images4. Set binary mode and use the Get command to download the file(dump_support.tgz).ftp>binftp>get dump_support.tgzxxxxx bytes sent in xx secs.ftp>quit59245-01 A 2-7