QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceResetSport [port_list]Reinitializes one or more ports given by [port_list]. [port_list] can be a set of portnumbers and ranges delimited by spaces. For example, [0 2 10-15] specifies ports0, 2, 10, 11, 12, 13, 14, and 15.radiusResets the RADIUS configuration to the default values as described inTable 12-10.servicesResets the I/O module services configuration to the default values as described inTable 12-11.snmpResets the SNMP configuration settings to the factory default values. Refer toTable 12-9 for SNMP configuration default values.switchResets the I/O module without a power-on self test. This is the default. This resetdisrupts traffic and does the following:• Activates the pending firmware.• Closes all management sessions.• Clears the event log. To save the event log before resetting, refer to the“Set Log” command on page 12-73.To reset the I/O module with a power-on self test, refer to the “Hardreset”command on page 12-25. To reset the I/O module without disrupting traffic, referto the “Hotreset” command on page 12-28.systemResets the system configuration settings to the factory default values asdescribed in Table 12-12.NOTE:• Because this keyword changes network parameters, theworkstation could lose communication with the I/O module.• This keyword does not affect installed license keys.12-56 59245-01 A