QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceResetResetAuthoritySyntaxKeywordsResets the I/O module configuration parameters. If you omit the keyword, thedefault is Reset Switch.Admin sessionresetcallhomeconfig [config_name]factoryipsecport [port_list]radiusservicessnmpswitch (default)systemcallhomeResets the Call Home database configuration to its default values.config [config_name]Resets the configuration given by [config_name] to the factory default values forswitch, port, and port threshold alarm configuration as described in Table 12-6through Table 12-12. If [config_name] does not exist on the I/O module, aconfiguration with that name will be created. If you omit [config_name], the activeconfiguration is reset. You must activate the configuration for the changes to takeeffect.factoryResets I/O module configuration, port configuration, port threshold alarmconfiguration, zoning configuration, SNMP configuration, system configuration,security configuration, RADIUS configuration, and I/O module servicesconfiguration to the factory default values as described in Table 12-6 throughTable 12-12. The I/O module configuration is activated automatically.NOTE:This keyword does not affect installed license keys.ipsecResets the IP security database configuration to its default values.59245-01 A 12-55