QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceProfileExamplesThe following is an example of the Profile Create command:QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome editQLogic8GbT (admin-callhome) #> profile create profile_1A list of attributes with formatting and default values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress ’q’ or ’Q’ and the ENTER key to do so.Default Values:LevelAlarmFormatFullTextMaxSize 100000EmailSubject RecipientEmail (up to 10 entries allowed)New Value (press ENTER to accept default value, 'q' to quit):Level (Alarm,Critical,Warn,None) :Format (1=FullText, 2=ShortText, 3=Tsc1) :MaxSize (decimal value, 650-100000) :EmailSubject (string, max=64 chars, N=None) : Technical problemRecipientEmail (ex: admin@company.com, N=None)1. : admin0@company.comThe profile has been created.This configuration must be saved with the callhome save commandbefore it can take effect, or to discard this configurationuse the callhome cancel command.QLogic8GbT (admin-callhome) #> callhome saveThe CallHome database profiles will be saved and activated.Please confirm (y/n): [n] y59245-01 A 12-51