QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceProfileSTable 12-4. Profile Configuration Parameters (Continued)ParameterFormatMaxSizeEmailSubjectRecipientMailCaptureEnabledDescriptionLevel of detail to be included in the e-mail message:• ShortText–includes switch and event information.• FullText–includes switch information, event information, CallHome contact information, and SNMP contact information.• Tsc1–includes switch and event information in a formatintended for automated e-mail readers.Maximum number of characters allowed in the e-mail message.Decreasing this parameter makes for easier reading on small displaydevices such as cell phones. The minimum is 650. The maximumand default is 100,000.E-mail subject of up to 64 charactersRecipient e-mail addresses; maximum of 10 addresses. The formatis account@domain.Enables (True) or disables (False) the data capture configurationonly when creating the Tech_Support_Center profile. For moreinformation about the data capture configuration, refer to theCapture command.delete [profile]Deletes the specified profile given by [profile] from the Call Home database. Youmust enter the Callhome Save command afterwards to save your changes.edit [profile]Opens an edit session in which to change the configuration of an existing profilegiven by [profile]. The Tech_Support_Center profile can be edited. Fordescriptions of the profile parameters, refer to Table 12-4. The CaptureEnabledparameter is displayed only when modifying the Tech_Support_Center profile.rename [profile_old] [profile_new]Renames the profile given by [profile_old] to the profile given by [profile_new]. Youmust enter the Callhome Save command afterwards to save your changes.12-50 59245-01 A