QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceProfileProfileAuthoritySyntaxKeywordsCreates and modifies profiles with which to customize Call Home e-mailnotification. A profile defines the event severity level at which to generate e-mails,e-mail subject and text, and e-mail recipients.Admin session and a Callhome Edit session. Refer to the “Callhome” commandon page 12-4 for information about starting a Callhome Edit session.profilecopy [profile_source] [profile_destination]create [profile]delete [profile]edit [profile]rename [profile_old] [profile_new]copy [profile_source] [profile_destination]Creates a new profile named [profile_destination] and copies the configurationinto it from the profile given by [profile_source]. You must enter the CallhomeSave command afterwards to save your changes. Neither [profile_source] nor[profile_destination] can be Tech_Support_Center.create [profile]Creates a profile with the name given by [profile]. A profile name must begin with aletter and be no longer than 32 characters. Valid characters are 0-9, A-Z, a-z, _, $,^, and -. The Tech_Support_Center profile name is reserved. You must enter theCallhome Save command afterwards to save your changes. The Call Homedatabase supports a maximum of 25 profiles. Table 12-4 describes the profileconfiguration parameters.Table 12-4. Profile Configuration ParametersLevelParameterDescriptionEvent severity level at which to generate a Call Home e-mailmessage:• None–Generates e-mail messages for all events.• Warn–Generates e-mail messages for Warning, Critical, andAlarm events.• Critical–Generates e-mail messages for Critical and Alarmevents.• Alarm–Generates e-mail messages for Alarm events only.59245-01 A 12-49