QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceIpsec PolicySTable 12-3. Policy Configuration Parameters (Continued)ParameterespRuleLevelDescriptionRule level to apply for ESP protection:• Default–use the system wide default for the protocol• Use–use a security association if one is available• Require–a security association is required whenever apacket is sent that is matched with the policydelete [policy]Deletes the policy given by [policy] from the Security Policy database. You mustenter the Ipsec Save command afterwards to save your changes.edit [policy]Opens an edit session in which to change the configuration of an existing policygiven by [policy].list [option]Displays the configuration for the policies given by [option]. If you omit [option],the command displays the configuration of all active policies. [option] can be oneof the following:[policy]Displays the configuration for the policy given by [policy].activeDisplays the configuration for all active policies.configuredDisplays the configuration for all user-defined policies.editedDisplays the configuration for all policies that have been modified, but notsaved.rename [policy_old] [policy_new]Renames the policy given by [policy_old] to the policy given by [policy_new]. Youmust enter the Ipsec Save command afterwards to save your changes. Dynamicpolicies cannot be renamed.12-44 59245-01 A