QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceIpsec AssociationSIpsec AssociationCreates and manages associations in the Security Association database.AuthoritySyntaxKeywordsAdmin session and an Ipsec Edit sessionipsec associationcopy [association_source] [association_destination]create [association]delete [association]edit [association]list [association]rename [association_old] [association_new]copy [association_source] [association_destination]Creates a new association named [association_destination] and copies theconfiguration into it from the association given by [association_source].[association_destination] must not begin with DynamicSA_, which is reserved fordynamic associations. You must enter the Ipsec Save command afterwards tosave your changes.create [association]Creates an association with the name given by [association]. An association namemust begin with a letter and be no longer than 32 characters. Valid characters are0-9, A-Z, a-z, _, $, ^, and -. The Security Association database supports amaximum of 512 user-defined associations. You must enter the Ipsec Savecommand afterwards to save your changes. The association configurationparameters are described in Table 12-2.Table 12-2. Association Configuration ParametersParameterDescriptionSourceAddressDestinationAddressDescriptionDescription of the association.IP address or DNS host name of the host, switch, orgateway from which data originates.IP address or DNS host name of the host, switch, orgateway receiving data. If you specified an IPaddress for the SourceAddress, the DestinationAddressmust use the same IP version format.12-34 59245-01 A