QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceImageImageAuthoritySyntaxKeywordsManages and installs I/O module firmware.Admin sessionimagecleanupfetch [account_name] [ip_address] [file_source] [file_destination]installlisttftp [ip_address] [file_source] [file_destination]unpack [file]cleanupRemoves all firmware image files from the I/O module. All firmware image files areremoved automatically each time the I/O module is reset.fetch [account_name] [ip_address] [file_source] [file_destination]Retrieves image file given by [file_source] using FTP and stores it on the I/Omodule with the file name given by [file_destination]. The image file is retrievedfrom the host IP address given by [Ip_address]. [ip_address] can be an IPaddress or a DNS host name. If an account name needs a password to accessthe FTP server, the system will prompt you for it.installDownloads firmware from a remote host to the I/O module, installs the firmware,then resets the I/O module to activate the firmware. This is disruptive. Thecommand prompts you for the following:• File transfer protocol (FTP or TFTP)• IP address or DNS host name of the remote host• An account name and password on the remote host (FTP only)• Pathname for the firmware image filelistDisplays the list of image files that reside on the I/O module.tftp [ip_address] [file_source] [file_destination]Retrieves image file given by [file_source] using TFTP and stores it on the I/Omodule with the file name given by [file_destination]. The image file is retrievedfrom the host IP address given by [Ip_address]. [ip_address] can be an IPaddress or a DNS host name.59245-01 A 12-29