QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceHelpSHelpAuthoritySyntaxKeywordsDisplays a brief description of the specified command, its keywords, and usage.Nonehelp [command] [keyword][command]Displays a summary of the command given by [command] and its keywords. If youomit [command], the system displays all available commands.[keyword]Displays a summary of the keyword given by [keyword] belonging to thecommand given by [command]. If you omit [keyword], the system displays theavailable keywords for the specified command.allDisplays a list of all available commands (including command variations).ExamplesThe following is an example of the Help Config command:QLogic8GbT #> help configconfig CONFIG_OPTIONSThe config command operates on configurations.Usage: config { activate | backup | cancel | copy | delete |edit | list | restore | save }The following is an example of the Help Config Edit command:QLogic8GbT #> help config editconfig edit [CONFIG_NAME]This command initiates a configuration session and places the current sessioninto config edit mode.If CONFIG_NAME is given and it exists, it gets edited; otherwise, it getscreated. If it is not given, the currently active configuration is edited.Admin mode is required for this command.Usage: config edit [CONFIG_NAME]12-26 59245-01 A