QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceFirmware InstallSThe following is an example of the Firmware Install command using TFTP:QLogic8GbT #> admin startQLogic8GbT (admin) #> firmware installThe switch will be reset. This process will cause a disruptionto I/O traffic.Continuing with this action will terminate all management sessions,including any Telnet sessions. When the firmware activation is complete,you may log in to the switch again.Do you want to continue? [y/n]: yPress 'q' and the ENTER key to abort this command.FTP or TFTP : tftpIP Address : 10.0.0.254Source Filename : 7.10.00.xx_ipcAbout to install image. Do you want to continue? [y/n] yConnected to 10.0.0.254 (10.0.0.254).220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready.bin200 Type set to I.verboseVerbose mode off.This may take several seconds...The switch will now reset.Connection closed by foreign host.12-24 59245-01 A