QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A2 – Command Line Interface UsageOpening and Closing an Admin SessionAn I/O module supports a combined maximum of 19 logins or sessions reservedas follows:• 4 logins or sessions for internal applications such as management serverand SNMP• 9 high priority Telnet sessions• 6 logins or sessions for Enterprise Fabric Suite 2007 logins, ApplicationProgramming Interface (API) out-of-band logins, and Telnet logins.Additional logins will be refused.Opening and Closing an Admin SessionThe command line interface performs monitoring and configuration tasks.Commands that perform monitoring tasks are available to all user accounts.Commands that perform configuration tasks are available only after entering theAdmin Start command to open an Admin session. A user account must haveAdmin authority to enter the Admin Start command.The following is an example of how to open and close an Admin session:QLogic8GbT #> admin startQLogic8GbT (admin) #>...QLogic8GbT (admin) #> admin end59245-01 A 2-3