QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceCreateSThe following is an example of the Create Support command and how todownload the support file to your workstation. When prompted to send the supportfile to another machine, decline, then close the Telnet session. Open an FTPsession on the I/O module and log in with the account name images andpassword images. Transfer the dump_support.tgz file in binary mode with the Getcommand.QLogic8GbT #> create supportLog Msg:[Creating the support file - this will take several seconds]FTP the dump support file to another machine? (y/n): nQLogic8GbT (admin) #> quit>ftp switch_ip_addressuser: imagespassword: imagesftp>binftp>get dump_support.tgzxxxxx bytes sent in xx secs.ftp> quitThe following is an example of the Create Certificate command:QLogic8GbT (admin) #> create certificateThe current date and time is day mon date hh:mm:ss UTC yyyy.This is the time used to stamp onto the certificate.Is the date and time correct? (y/n): [n] yCertificate generation successful.12-18 59245-01 A