QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceCreateSCreateAuthoritySyntaxKeywordsCreates support files for troubleshooting I/O module problems, and certificates forsecure communications for Enterprise Fabric Suite 2007 and SMI-S.Admin session for the Certificate keywordcreatecertificatesupportcertificateCreates a security certificate on the I/O module. The security certificate is requiredto establish an SSL connection with a management application such as EnterpriseFabric Suite 2007. The certificate is valid 24 hours before the certificate creationdate and expires 365 days after the creation date. Should the current certificatebecome invalid, use the Create Certificate command to create a new one.NOTE:To insure the creation of a valid certificate, be sure that the I/O module andthe workstation time and date are the same. Refer to the following:• “Date” command on page 12-19 for information about setting the timeand date• “Set Timezone” command on page 12-105 for information about settingthe time zone on the I/O module and workstation• “Set Setup System” command on page 12-96 (System keyword) forinformation about enabling the Network Time Protocol for synchronizingthe time and date on the I/O module and workstation from an NTPserver.supportAssembles all log files and I/O module memory data into a file (dump_support.tgz)on the I/O module. If your workstation has an FTP server, you can proceed withthe command prompts to send the file from the I/O module to a remote host.Otherwise, you can use FTP to download the support file from the I/O module toyour workstation. The support file is useful to technical support personnel fortroubleshooting I/O module problems. Use this command when directed by yourauthorized maintenance provider. This keyword does not require an Adminsession.f12-16 59245-01 A