QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceConfigdelete [config_name]Deletes the configuration given by [config_name]. You cannot delete the defaultconfiguration (Default Config) nor the active configuration.edit [config_name]Opens an edit session for the configuration given by [config_name]. If you omit[config_name], the currently active configuration is used.export [account_name] [ip_address] [file_name]Exports an existing backup configuration file (configdata) from the switch to aremote server. The server IP address and corresponding user account are givenby [ip_address] and [account_name] respectively. [ip_address] can be an IPaddress or a DNS host name. The file name on the remote server is given by[file_name]. The system will prompt for a password if the server requires one.import [account_name] [ip_address] [file_name]Imports a backup configuration file given by [file_name] from a remote server tothe switch. The server IP address and corresponding user account are given by[ip_address] and [account_name] respectively. [ip_address] can be an IP addressor a DNS host name. The file name on the remote server is given by [file_name].The system will prompt for a password if the server requires one. You must enterthe Config Restore command to apply the configuration to the switch.listDisplays a list of all available configurations. This keyword does not require anAdmin session.restore importRestores configuration settings from a backup file named configdata, which mustbe first uploaded on the module using FTP. You create the backup file using theConfig Backup command. Use FTP to load the backup file on the module, thenenter the Config Restore command. After the restore is complete, the moduleautomatically resets. Refer to “Back Up and Restore an I/O Module Configuration”on page 5-12.The optional Import keyword imports the backup file from a remote serverprompting you for an account name, server IP address or DNS host name,configuration file name on the server, and a password if the server requires one.When the upload is complete, the switch restores the configuration.59245-01 A 12-13