QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceConfigSConfigAuthoritySyntaxKeywordsManages the Fibre Channel configurations on an I/O module. For informationabout setting the port and I/O module configurations, refer to the“Set Config Switch” command on page 12-69.Admin session for all keywords except Backup and Listconfigactivate [config_name]backup [export]cancelcopy [config_source] [config_destination]delete [config_name]edit [config_name]export [account_name] [ip_address] [file_name]import [account_name] [ip_address] [file_name]listrestoresave [config_name]activate [config_name]Activates the configuration given by [config_name]. If you omit [config_name], thecurrently active configuration is used. Only one configuration can be active at atime.backup [export]Creates a file named configdata, which contains the system configurationinformation. This keyword does not require an Admin session. Configurationbackup files are deleted from the switch during a power cycle or switch reset.The optional Export keyword creates the configuration backup file and exports it toa remote server prompting you for the server, an account name, the server IPaddress or DNS host name, destination file name, and a password if the serverrequires one.cancelTerminates the current configuration edit session without saving changes thatwere made.copy [config_source] [config_destination]Copies the configuration given by [config_source] to the configuration given by[config_destination]. The I/O module supports up to 10 configurations includingthe default configuration.12-12 59245-01 A