QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceCaptureCaptureAuthoritySyntaxKeywordsManages the data capture configuration for the Tech_Support_Center Call Homeprofile. The data capture configuration determines the time and frequency bywhich status and trend data is collected from the switch and sent to recipientsspecified in the Tech_Support_Center profile.Admin session and a Callhome Edit session. Refer to the “Callhome” commandon page 12-4 for information about starting a Callhome Edit session.captureaddeditremoveaddAdds data capture instructions to the Tech_Support_Center profile. Table 12-1describes the data capture parameters.Table 12-1. Data Capture Configuration ParametersParametersTimeOfDayDayOfWeekIntervalDescriptionTime of day to send status and trend data to theTech_Support_Center profile e-mail recipients. The format ishh:mm on a 24-hour clock. The default 02:00.Day-of-the-week to send status and trend data to theTech_Support_Center profile e-mail recipients. Values can be Sun,Mon, Tue, Wed, Thur, Fri, Sat. The default is Sat.Number of weeks between capture data e-mails to theTech_Support_Center profile e-mail recipients. Values can be1–26. The default is 1.editOpens an edit session in which to modify the data capture configuration of theTech_Support_Center profile. Refer to Table 12-1 for a description of the datacapture configuration parameters.removeRemoves the data capture configuration from the Test_Support_Center profile.59245-01 A 12-9