QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceAdminAdminAuthoritySyntaxKeywordsOpens and closes an Admin session. The Admin session provides access tocommands that change module configurations. Only one Admin session can beopen on the module at any time. An inactive Admin session will time out after aperiod of time which can be changed using the Set Setup System command.User account with Admin authorityadminstart (or begin)end (or stop)cancelstart (or begin)Opens the Admin sessionend (or stop)Closes the Admin session. The Hardreset, Hotreset, Quit, Shutdown, andReset Switch commands will also end an Admin session.cancelTerminates an Admin session opened by another user. Use this keyword with carebecause it terminates the Admin session without warning the other user andwithout saving pending changes.NotesExamplesClosing a Telnet window during an Admin session does not release the session. Inthis case, you must either wait for the Admin session to time out, or use the AdminCancel command.The following example shows how to open and close an Admin session:QLogic8GbT #> admin startQLogic8GbT (admin) #>...QLogic8GbT (admin) #> admin end59245-01 A 12-3