QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

11 – Simple Network Management Protocol ConfigurationManaging the SNMP Version 3 ConfigurationSModify an SNMP Version 3 User AccountTo modify an SNMP version 3 user account, enter the Snmpv3user Edit commandas shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> snmpv3user editA list of SNMPV3 user attributes with formatting and current attributevalues for the specified SNMPV3 user will follow.Enter a new value OR simply press the ENTER key where-ever allowed toaccept the current value.If you wish to terminate this process before reaching the end of the list,press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.Username (8-32 chars) : snmpuser1Group (0=ReadOnly, 1=ReadWrite) [ReadWrite ] : 1Authentication (True/False) [True ] : fDo you want to save and activate this setup ?(y/n): [n] nSNMPV3 user account edited and activated.11-8 59245-01 A