QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A11 – Simple Network Management Protocol ConfigurationManaging the SNMP Version 3 ConfigurationCreate an SNMP Version 3 User AccountTo create an SNMP version 3 user account, enter the Snmpv3user Add commandas shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> snmpv3user addA list of SNMPV3 user attributes with formatting and default values asapplicable will follow.Enter a new value OR simply press the ENTER key where-ever allowed toaccept the default value.If you wish to terminate this process before reaching the end of the list,press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.Username (8-32 chars) : snmpuser1Group (0=ReadOnly, 1=ReadWrite) [ReadOnly ] : 1Authentication (True/False) [False ] : tAuthType (1=MD5, 2=SHA) [MD5 ] : 1AuthPhrase (8-32 chars) : ***********Confirm AuthPhrase : ***********Privacy (True/False) [False ] : tPrivType (1=DES) [DES ] : 1PrivPhrase (8-32 chars) : ********Confirm PrivPhrase : ********Do you want to save and activate this snmpv3user setup ?(y/n): [n] ySNMPV3 user added and activated.Display SNMP Version 3 User AccountsTo display SNMP version 3 user accounts, enter the Snmpv3user List commandas shown in the following example:QLogic8GbT #> snmpv3user listUsername Group AuthType PrivType-------- ----- -------- --------snmpuser1 ReadWrite MD5 DES59245-01 A 11-7