QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

10 – Call Home ConfigurationChanging SMTP ServersSChanging SMTP ServersThe Call Home service configuration enables you to specify a primary and asecondary SMTP server to which the switch connects. The active server is theserver that receives messages from the switch. By default, the primary SMTPserver is the active server. Should the active server lose connection, controlpasses automatically to the other server. You can explicitly change the activeserver by entering the Callhome Changeover command as shown in the followingexample:QLogic8GbT #> admin startQLogic8GbT #> callhome editQLogic8GbT #> (admin-callhome) #> callhome changeoverThe currently active CallHome SMTP server will change. Please confirm (y/n): [n] yThough the active server status changes, the primary SMTP server remains theprimary, and the secondary SMTP server remains the secondary.Clearing the Call Home Message QueueEnter the Callhome Queue Clear command to clear email messages from the CallHome message queue as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome queue clearThe callhome queue will be cleared. Please confirm (y/n): [n] yRefer to the Callhome Queue Stats command to display the contents of the CallHome message queue.10-16 59245-01 A