QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A10 – Call Home ConfigurationTesting a Call Home ProfileDeleting a Data Capture ConfigurationEnter the Capture Remove command to delete a data capture configuration fromthe Tech_Support_Center profile as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome editQLogic8GbT (admin-callhome) #> capture removeCapture Entries for Profile: Tech_Support_CenterIndex TimeOfDay DayOfWeek Interval----- --------- --------- --------1 02:00 Sat 1 (weeks)Please select a capture entry from the list above ('q' to quit): 1The selected capture entry has been removed from profile Tech_Support_Center.This configuration must be saved with the 'callhome save' commandbefore it can take effect, or to discard this configurationuse the 'callhome cancel' command.Testing a Call Home ProfileEnter the Callhome Test Profile command to test a Call Home profile as shown inthe following example. This command generates a test message and routes it tothe email recipients specified in the profile.QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome test profile group4A callhome profile test has been started.A notification with the test result will appearon the screen when the test has completed.QLogic8GbT (admin) #>Test for Callhome Profile group4 Passed.59245-01 A 10-15