QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

10 – Call Home ConfigurationManaging the Call Home DatabaseSModifying a Data Capture ConfigurationEnter the Capture Edit command to modify a data capture configuration in theTech_Support_Center profile as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome editQLogic8GbT (admin-callhome) #> capture editCapture Entries for Profile: Tech_Support_CenterIndex TimeOfDay DayOfWeek Interval----- --------- --------- --------1 02:00 Sat 1 (weeks)Please select a capture entry from the list above ('q' to quit): 1A list of attributes with formatting and current values will follow.Enter a value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Value (press ENTER to accept the default, 'q' to quit):TimeOfDay (HH:MM) [02:00]DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]Interval (decimal value, 1-26 weeks) [1 ]The selected capture entry has been edited for profile Tech_Support_Center.This configuration must be saved with the 'callhome save' commandbefore it can take effect, or to discard this configurationuse the 'callhome cancel' command.10-14 59245-01 A