QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A10 – Call Home ConfigurationManaging the Call Home DatabaseAdding a Data Capture ConfigurationEnter the Capture Add command to add a data capture configuration to theTech_Support_Center profile as shown in the following example. If theTech_Support_Center profile does not exist, you must create it using the ProfileCreate command.QLogic8GbT #> admin startQLogic8GbT (admin) #> callhome editQLogic8GbT (admin-callhome) #> capture addA list of attributes with formatting and default values will follow.Enter a value or simply press the ENTER key to accept the default value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Value (press ENTER to accept the default, 'q' to quit):TimeOfDay (HH:MM) [02:00]DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]Interval (decimal value, 1-26 weeks) [1 ]A capture entry has been added to profile Tech_Support_Center.This configuration must be saved with the 'callhome save' commandbefore it can take effect, or to discard this configurationuse the 'callhome cancel' command.59245-01 A 10-13