QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A10 – Call Home ConfigurationManaging the Call Home DatabaseTo close the Callhome Edit session without saving changes, enter the CallhomeCancel command.QLogic8GbT (admin-callhome)#> callhome cancelThe Admin End command releases the Admin session for other administratorswhen you are done making changes to the switch.To remove all Call Home profiles and restore the Call Home service configurationto its factory state, enter the Reset Callhome command.QLogic8GbT (admin) #> reset callhomeManaging the Call Home database consists of the following tasks:• Displaying Call Home Database Information• Creating a Profile• Deleting a Profile• Modifying a Profile• Renaming a Profile• Copying a Profile• Adding a Data Capture Configuration• Modifying a Data Capture Configuration• Deleting a Data Capture ConfigurationDisplaying Call Home Database InformationEnter the Callhome History command to display the Call Home data base changehistory information as shown in the following example:QLogic8GbT #> callhome historyCallHome Database History-------------------------ConfigurationLastEditedBy admin@OB-session2ConfigurationLastEditedOn day mmm dd hh:mm:ss yyyyDatabaseChecksum000014a3ProfileNamegroup4ProfileLevelWarnProcessedCount 286ProcessedLastday mmm dd hh:mm:ss yyyyProfileNamegroup5ProfileLevelAlarmProcessedCount 25ProcessedLastday mmm dd hh:mm:ss yyyy59245-01 A 10-7