QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A9 – Event Log ConfigurationLogging to a Remote HostNew Value (press ENTER to accept current value, 'q' to quit, 'n' for none):NTPClientEnabled (True / False) :NTPServerDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) :NTPServerAddress (hostname, IPv4, or IPv6 Address) :Logging Network Configuration - may optionally use 'set setup system logging'command.Current Values:LocalLogEnabledTrueRemoteLogEnabled FalseRemoteLogHostAddress 10.0.0.254New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):LocalLogEnabled (True / False) :RemoteLogEnabled (True / False) :RemoteLogHostAddress (hostname, IPv4, or IPv6 Address) :Timer Configuration - may optionally use 'set setup system timers' command.Current Values:AdminTimeout 30InactivityTimeout 10New Value (press ENTER to accept current value, 'q' to quit):AdminTimeout (dec value 0-1440 minutes, 0=never) :InactivityTimeout (dec value 0-1440 minutes, 0=never) :Do you want to save and activate this system setup? (y/n): [n]59245-01 A 9-7