QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A9 – Event Log ConfigurationClearing the Event LogRestore the Event Log ConfigurationEnter the Set Log Restore command to return the event log configuration to thefactory default as shown in the following example:QLogic8GbT (admin) #> set log restoreClearing the Event LogEnter the Set Log Clear command to delete all entries in the event log as shown inthe following example:QLogic8GbT (admin) #> set log clearLogging to a Remote HostThe I/O module comes from the factory with local logging enabled, which instructsthe I/O module firmware to maintain an event log in I/O module memory. The I/Omodule can also be configured to log events to a remote host that supports thesyslog protocol. This requires that you enable remote logging on the I/O moduleand specify an IP address for the remote host.NOTE:To log event messages on a remote host, you must edit the syslog.conf fileon the remote host and then restart the syslog daemon. The syslog.conf filemust contain an entry that specifies the name of the log file. Add thefollowing line to the syslog.conf file. A separates the selector field(local0.info) and action field which contains the log file path name(/var/adm/messages/messages.name).local0.info /var/adm/messages/messages.nameConsult your host operating system documentation for information on how toconfigure remote logging.59245-01 A 9-5