7. operating the multipress - Grass

More documents

Recommendations

Info

8. TROUBLE-SHOOTING AND CORRECTIVE ACTIONBA2 4CDIllustration 8-107-01Illustration 8-108-0196The star in your cabinet
8. TROUBLE-SHOOTING AND CORRECTIVE ACTION8-107 The vertical bore head is not parallel to the machine table Illustration 8-107-01- Swing gearbox to 0˚ position. (See section 7-306)- Test drill (see section 7-603), check the result.- If there is an error a or b (see illustration 8-107-01), follow this steps:- Turn off the main switch.- Swing gearbox approx. 45˚. (See section 7-306)- Loose the lock nut „1“ with 10 mm open-end fork wrench.- Twist screw „2“ with 10 mm open-end fork wrench.error a: Twist screw counterclockwiseerror b: Twist screw clockwise- Tighten the lock nut „1“ with 10 mm open-end fork wrench.- Swing gearbox to 0˚ position. (See section 7-306)- Turn on the main switch.- Test drill (see section 7-603) and check the result, if necessary, repeat the above steps.8-108 The vertical bore head is not at a right angle to the machine tableIllustration 8-108-01- Swing gearbox to 90˚ position. (See section 7-306)- Test drill (see section 7-610), check the result.- If there is an error c or d (see illustration 8-107-01), follow this steps:- Turn off the main switch.- Swing gearbox approx. 45˚. (See section 7-306)- Loose the lock nut „3“ with 10 mm open-end fork wrench.- Twist screw „4“ with 10 mm open-end fork wrench.error c: Twist screw clockwiseerror d: Twist screw counterclockwise- Tighten the lock nut „1“ with 10 mm open-end fork wrench.- Swing gearbox to 90˚ position. (See section 7-306)- Turn on the main switch.- Test drill (see section 7-610) and check the result, if necessary, repeat the above steps.The star in your cabinet97
Page 4:
TECHNICAL SPECIFICATIONSWeights:Tot
Page 7 and 8:
TABLE OF CONTENTSPage8. Trouble-sho
Page 9 and 10:
1. GENERAL INFORMATION1-001 List of
Page 11 and 12:
2. SAFETY INFORMATION2-001 Safety i
Page 13 and 14:
2. SAFETY INFORMATION2-006 Dangers
Page 15 and 16:
3. DESCRIPTION OF PRODUCTS3-002 App
Page 17 and 18:
3. DESCRIPTION OF PRODUCTS3-005 Var
Page 19 and 20:
3. DESCRIPTION OF PRODUCTSSide stop
Page 21 and 22:
3. DESCRIPTION OF PRODUCTS3-007 Sta
Page 23 and 24:
4. DESCRIPTION OF MACHINE COMPONENT
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46: 4. DESCRIPTION OF MACHINE COMPONENT
Page 47 and 48: 4. DESCRIPTION OF MACHINE COMPONENT
Page 49 and 50: 6. START UP6-001 Pneumatic connecti
Page 51 and 52: 7. OPERATING THE MULTIPRESS7-1 Requ
Page 53 and 54: 7. OPERATING THE MULTIPRESS7-3 Sett
Page 55 and 56: 7. OPERATING THE MULTIPRESS7-304 Se
Page 61 and 62: 7. OPERATING THE MULTIPRESS7-503 Op
Page 63 and 64: 7. OPERATING THE MULTIPRESS7-6 Appl
Page 65 and 66: 7. OPERATING THE MULTIPRESS7-602 Dr
Page 75 and 76: 7. ARBEITEN MIT DER COMBIPRESS7-607
Page 91 and 92: 8. TROUBLE-SHOOTING AND CORRECTIVE
Page 95: 8. TROUBLE-SHOOTING AND CORRECTIVE
Page 105 and 106: 10. MISCELLANEOUS10-001 Guarantee C
Page 107 and 108: 10. MISCELLANEOUS10-002 Disposal Fo
Page 109 and 110: 10. MISCELLANEOUS10-003 Resale Form
Page 111 and 112: 10. MISCELLANEOUS10-004 Questionnai
Page 113 and 114: 10. MISCELLANEOUS10-005 Questionnai
Page 115 and 116: NOTESThe star in your cabinet115
Page 117 and 118: REPRESENTATIVES AROUND THE WORLDMDT
show all

7. operating the multipress - Grass

Create successful ePaper yourself

Delete template?

Save as template?