7. operating the multipress - Grass

More documents

Recommendations

Info

7. OPERATING THE MULTIPRESSIllustration 7-503-0160The star in your cabinet
7. OPERATING THE MULTIPRESS7-503 Operating the index gauge when drilling the hole patterns Illustration 7-503-01Tools required:5 mm Allen keyIndex gaugeThe index gauge is used to set the distances between the individual side stops in 32 mm spaced notchesfor the hole line drilling pattern.- Set the first side stop “A” on the desired dimension (64 mm on the right side of the workpiece, 480 mm onthe left side of the workpiece + the desired beginning of the hole line pattern from the stop edge).- Place the index gauge “C” with the edge “C1” on the first side stop.- Loosen the next side stop and slide it towards the edge “C2” of the index gauge.- If more stops are needed, place the index gauge on edge “B” and continue to set the other stops in thesame way.In order to avoid adjustment errors and to maintain adjustment precision between the left and right, werecommend setting the stops on the second side with a stop adjustment gauge.7-504 Setting the “Hold-Down Clamps” (accessory)See instructions of the “Hold-Down Clamps”The star in your cabinet61
Page 4:
TECHNICAL SPECIFICATIONSWeights:Tot
Page 7 and 8:
TABLE OF CONTENTSPage8. Trouble-sho
Page 9 and 10: 1. GENERAL INFORMATION1-001 List of
Page 11 and 12: 2. SAFETY INFORMATION2-001 Safety i
Page 13 and 14: 2. SAFETY INFORMATION2-006 Dangers
Page 15 and 16: 3. DESCRIPTION OF PRODUCTS3-002 App
Page 17 and 18: 3. DESCRIPTION OF PRODUCTS3-005 Var
Page 19 and 20: 3. DESCRIPTION OF PRODUCTSSide stop
Page 21 and 22: 3. DESCRIPTION OF PRODUCTS3-007 Sta
Page 23 and 24: 4. DESCRIPTION OF MACHINE COMPONENT
Page 49 and 50: 6. START UP6-001 Pneumatic connecti
Page 51 and 52: 7. OPERATING THE MULTIPRESS7-1 Requ
Page 53 and 54: 7. OPERATING THE MULTIPRESS7-3 Sett
Page 55 and 56: 7. OPERATING THE MULTIPRESS7-304 Se
Page 57 and 58: 7. OPERATING THE MULTIPRESS7-4 Sett
Page 59: 7. OPERATING THE MULTIPRESS7-5 Sett
Page 63 and 64: 7. OPERATING THE MULTIPRESS7-6 Appl
Page 65 and 66: 7. OPERATING THE MULTIPRESS7-602 Dr
Page 75 and 76: 7. ARBEITEN MIT DER COMBIPRESS7-607
Page 91 and 92: 8. TROUBLE-SHOOTING AND CORRECTIVE
Page 105 and 106: 10. MISCELLANEOUS10-001 Guarantee C
Page 107 and 108: 10. MISCELLANEOUS10-002 Disposal Fo
Page 109 and 110: 10. MISCELLANEOUS10-003 Resale Form
Page 111 and 112:
10. MISCELLANEOUS10-004 Questionnai
Page 113 and 114:
10. MISCELLANEOUS10-005 Questionnai
Page 115 and 116:
NOTESThe star in your cabinet115
Page 117 and 118:
REPRESENTATIVES AROUND THE WORLDMDT
show all

7. operating the multipress - Grass

Create successful ePaper yourself

Delete template?

Save as template?