7. operating the multipress - Grass

More documents

Recommendations

Info

7. ARBEITEN MIT DER MULTIPRESS11978171410137121615123454 5 6Illustration 7-401-01876 5 415391014122111111617131118Illustration 7-402-0156The star in your cabinet
7. OPERATING THE MULTIPRESS7-4 Setting the Multipress horizontal bore head7-401 Setting the horizontal drilling depth Illustration 7-401-01The horizontal bore head has a six-compartment revolver stop for 6 adjustable drilling depths. The drillingdepths are selected by the customer.- Turn off the main switch.- Twist the knob “3” to the desired setting.- Loosen the corresponding lock nut in the revolver stop “14”.- Set the corresponding locking screw in the revolver stop “14”.- Tighten the respective lock nut in the revolver stop “14”.- Turn the main switch back on.7-402 Setting the horizontal drilling height Illustration 7-402-01- Turn off the main switch.- Pull the horizontal bore head manually to the front to the bars “6”.- Loosen the clamping lever “16” by turning counterclockwise.- Adjust the knurled screw “4”. 1 turn corresponds to about 1 mm in height.- Read the automatic position indicator “5”.- Lock the clamping lever “16” by turning clockwise.- Turn the main switch back on.7-403 Setting the horizontal drilling speed- Adjusting the pneumatic throttle “13” shown in illustration 4-002-03 (item 19 in the pneumatic wiringdiagram) changes the operating speed of the horizontal bore head.- The harder a workpiece is, the slower the operating speed.- The better the tool is, the faster the operating speed.- One turn clockwise decreases the operating speed.7-404 Setting the horizontal path limits (accessory) Illustration 7-401-01- Turn off the main switch.- Pull the horizontal bore head manually to the front to the bars “6” as shown in illustration 7-402-01.- Turn the knob “1” shown in illustration 7-401-01 to the desired position.- Slide the horizontal bore head behind manually up to the stop.- Turn the main switch back on.The revolver stop has 6 positions:Position 1, 3 and 5 are for drill bits up to 140 mm in length;Position 2 is for drill bits up to 57 mm in length.Position 4 is for drill bits up to 77 mm in length.Position 6 is for drill bits up to 100 mm in length.The star in your cabinet57
Page 4:
TECHNICAL SPECIFICATIONSWeights:Tot
Page 7 and 8: TABLE OF CONTENTSPage8. Trouble-sho
Page 9 and 10: 1. GENERAL INFORMATION1-001 List of
Page 11 and 12: 2. SAFETY INFORMATION2-001 Safety i
Page 13 and 14: 2. SAFETY INFORMATION2-006 Dangers
Page 15 and 16: 3. DESCRIPTION OF PRODUCTS3-002 App
Page 17 and 18: 3. DESCRIPTION OF PRODUCTS3-005 Var
Page 19 and 20: 3. DESCRIPTION OF PRODUCTSSide stop
Page 21 and 22: 3. DESCRIPTION OF PRODUCTS3-007 Sta
Page 23 and 24: 4. DESCRIPTION OF MACHINE COMPONENT
Page 49 and 50: 6. START UP6-001 Pneumatic connecti
Page 51 and 52: 7. OPERATING THE MULTIPRESS7-1 Requ
Page 53 and 54: 7. OPERATING THE MULTIPRESS7-3 Sett
Page 55: 7. OPERATING THE MULTIPRESS7-304 Se
Page 59 and 60: 7. OPERATING THE MULTIPRESS7-5 Sett
Page 61 and 62: 7. OPERATING THE MULTIPRESS7-503 Op
Page 63 and 64: 7. OPERATING THE MULTIPRESS7-6 Appl
Page 65 and 66: 7. OPERATING THE MULTIPRESS7-602 Dr
Page 75 and 76: 7. ARBEITEN MIT DER COMBIPRESS7-607
Page 91 and 92: 8. TROUBLE-SHOOTING AND CORRECTIVE
Page 105 and 106: 10. MISCELLANEOUS10-001 Guarantee C
Page 107 and 108:
10. MISCELLANEOUS10-002 Disposal Fo
Page 109 and 110:
10. MISCELLANEOUS10-003 Resale Form
Page 111 and 112:
10. MISCELLANEOUS10-004 Questionnai
Page 113 and 114:
10. MISCELLANEOUS10-005 Questionnai
Page 115 and 116:
NOTESThe star in your cabinet115
Page 117 and 118:
REPRESENTATIVES AROUND THE WORLDMDT
show all

7. operating the multipress - Grass

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?