7. operating the multipress - Grass

More documents

Recommendations

Info

7. OPERATING THE MULTIPRESS1 243X56Illustration 7-201-01 Illustration 7-201-02Illustration 7-202-01 Illustration 7-202-0250The star in your cabinet
7. OPERATING THE MULTIPRESS7-1 Requirements for operatorsThis machine should be operated only by trained persons who are thoroughly familiar with the machine andits applications. This knowledge may be obtained by studying the operating instructions thoroughly or byhands-on training by a specialist.The operators must be physically capable of running the machine. It is the responsibility of the owners tomake certain that only qualified persons operate this machine.It is the machine owner’s responsibility to comply with these instructions.7-2 Setting up the Multipress7-201 Installing the drill bit into the Multipress drill chuck Illustrations 7-201-01/02Necessary tools:4 mm Allen key- Loosen the fastening screw “2” with the 4 mm Allen key “1”.- Insert the drill bit “3” up to the stop pin in the drill chuck “5”, being careful of the drill bit’s position “4”.- Tighten the fastening screw “2”.Warning:In order to ensure that the drill bits all bore the same drilling depth, they must be set to the length “x“specified in illustration 7-201-02.7-202 Mounting an insertion die Illustrations 7-202-01, 7-202-02- Swing the insertion die arm up.- Loosen the clamping screw of the insertion die.- Insert the die with the clamping screw first.- Tighten the clamping screw by hand.The star in your cabinet51
Page 4: TECHNICAL SPECIFICATIONSWeights:Tot
Page 7 and 8: TABLE OF CONTENTSPage8. Trouble-sho
Page 9 and 10: 1. GENERAL INFORMATION1-001 List of
Page 11 and 12: 2. SAFETY INFORMATION2-001 Safety i
Page 13 and 14: 2. SAFETY INFORMATION2-006 Dangers
Page 15 and 16: 3. DESCRIPTION OF PRODUCTS3-002 App
Page 17 and 18: 3. DESCRIPTION OF PRODUCTS3-005 Var
Page 19 and 20: 3. DESCRIPTION OF PRODUCTSSide stop
Page 21 and 22: 3. DESCRIPTION OF PRODUCTS3-007 Sta
Page 23 and 24: 4. DESCRIPTION OF MACHINE COMPONENT
Page 49: 6. START UP6-001 Pneumatic connecti
Page 53 and 54: 7. OPERATING THE MULTIPRESS7-3 Sett
Page 55 and 56: 7. OPERATING THE MULTIPRESS7-304 Se
Page 61 and 62: 7. OPERATING THE MULTIPRESS7-503 Op
Page 63 and 64: 7. OPERATING THE MULTIPRESS7-6 Appl
Page 65 and 66: 7. OPERATING THE MULTIPRESS7-602 Dr
Page 75 and 76: 7. ARBEITEN MIT DER COMBIPRESS7-607
Page 91 and 92: 8. TROUBLE-SHOOTING AND CORRECTIVE
Page 101 and 102:
8. TROUBLE-SHOOTING AND CORRECTIVE
Page 103 and 104:
8. TROUBLE-SHOOTING AND CORRECTIVE
Page 105 and 106:
10. MISCELLANEOUS10-001 Guarantee C
Page 107 and 108:
10. MISCELLANEOUS10-002 Disposal Fo
Page 109 and 110:
10. MISCELLANEOUS10-003 Resale Form
Page 111 and 112:
10. MISCELLANEOUS10-004 Questionnai
Page 113 and 114:
10. MISCELLANEOUS10-005 Questionnai
Page 115 and 116:
NOTESThe star in your cabinet115
Page 117 and 118:
REPRESENTATIVES AROUND THE WORLDMDT
show all

7. operating the multipress - Grass

Create successful ePaper yourself

Delete template?

Save as template?