7. operating the multipress - Grass

More documents

Recommendations

Info

4. DESCRIPTION OF MACHINE COMPONENTS4. DESCRIPTION OF MACHINE COMPONENTSIllustration 4-004-0136The star in your cabinet
4. DESCRIPTION OF MACHINE COMPONENTS4-004 Description of the operating features Illustration 4-004-01Multipress Illustration 4-004-011 The selector switch for the pneumatic hold-down device is an accessory.left position = workpiece released right position = workpiece clamped2 The start button for the vertical movement.As long as the start button is pressed down or activated, the bore head moves downward until the borehead rests on the drilling depth stop or until the pneumatic cylinder has executed the complete strokemotion or until the depth gauge activates.3 The selector switch for the workpiece is on “clamp” with horizontal drilling.left position = workpiece released right position = workpiece clamped4 The start button for the horizontal movement.As long as the start button is pressed down or activated, the bore head moved towards the front untilthe bore head rests on the drilling depth stop (revolver stop) or until the pneumatic cylinder has executedthe complete stroke motion.5 The main switch which is located in the switchgear cabinet.Warning: this switch controls the electric motor only … not the pneumatic control6 Insertion die arm which holds the insertion dies.7 Drilling depth gauge of the vertical bore head8 The travel limit of the vertical bore head9 Locking pin to swing the vertical bore head10 Revolver stop - travel limit of the horizontal bore head11 Manual wheel to adjust distances of the vertical bore head12 Revolver stop - various drilling depths of the horizontal bore head13 Height adjustment of the horizontal bore head4-005 Machine operationsVertical bore head:By pressing the start button “2” (see illustration 4-004-01), the pneumatic cylinder is activated and guidesthe bore head’s downward movement.The air is released from the cylinder by means of a non-return throttle valve “11” (illustration 4-006-0X) andthe activated pneumatic roller valve “12” (illustration 4-006-0X) or the non-return throttle valve “13”(illustration 4-006-0X). The downward motion continues as long as the start button is pressed. The processis completed when the set depth is reached (position 7, illustration 4-004-01) or when the depth gauge hitsan obstruction. If the start button is released or the depth gauge meets an obstacle, the vertical bore headgoes back up.Horizontal bore head:In order for the horizontal bore head to work, the workpiece must be clamped down with the swinging insertiondie arm. The selector switch “3” (illustration 4-004-01) must be turned to the right. Activating the startbutton “4” (illustration 4-004-01) initiates a movement of the horizontal bore head towards the front until theset drilling depth is reached by means of a revolver stop “12: (illustration 4-004-01). Releasing the startbutton makes the horizontal bore head move back again.The star in your cabinet37
Page 4: TECHNICAL SPECIFICATIONSWeights:Tot
Page 7 and 8: TABLE OF CONTENTSPage8. Trouble-sho
Page 9 and 10: 1. GENERAL INFORMATION1-001 List of
Page 11 and 12: 2. SAFETY INFORMATION2-001 Safety i
Page 13 and 14: 2. SAFETY INFORMATION2-006 Dangers
Page 15 and 16: 3. DESCRIPTION OF PRODUCTS3-002 App
Page 17 and 18: 3. DESCRIPTION OF PRODUCTS3-005 Var
Page 19 and 20: 3. DESCRIPTION OF PRODUCTSSide stop
Page 21 and 22: 3. DESCRIPTION OF PRODUCTS3-007 Sta
Page 23 and 24: 4. DESCRIPTION OF MACHINE COMPONENT
Page 35: 4. DESCRIPTION OF MACHINE COMPONENT
Page 49 and 50: 6. START UP6-001 Pneumatic connecti
Page 51 and 52: 7. OPERATING THE MULTIPRESS7-1 Requ
Page 53 and 54: 7. OPERATING THE MULTIPRESS7-3 Sett
Page 55 and 56: 7. OPERATING THE MULTIPRESS7-304 Se
Page 61 and 62: 7. OPERATING THE MULTIPRESS7-503 Op
Page 63 and 64: 7. OPERATING THE MULTIPRESS7-6 Appl
Page 65 and 66: 7. OPERATING THE MULTIPRESS7-602 Dr
Page 75 and 76: 7. ARBEITEN MIT DER COMBIPRESS7-607
Page 83 and 84: 7. OPERATING THE MULTIPRESS7-7 Appl
Page 87 and 88:
7. OPERATING THE MULTIPRESS7-703 Dr
Page 89 and 90:
7. OPERATING THE MULTIPRESS7-8 Appl
Page 91 and 92:
8. TROUBLE-SHOOTING AND CORRECTIVE
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
10. MISCELLANEOUS10-001 Guarantee C
Page 107 and 108:
10. MISCELLANEOUS10-002 Disposal Fo
Page 109 and 110:
10. MISCELLANEOUS10-003 Resale Form
Page 111 and 112:
10. MISCELLANEOUS10-004 Questionnai
Page 113 and 114:
10. MISCELLANEOUS10-005 Questionnai
Page 115 and 116:
NOTESThe star in your cabinet115
Page 117 and 118:
REPRESENTATIVES AROUND THE WORLDMDT
show all

7. operating the multipress - Grass

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?