7. operating the multipress - Grass
7. operating the multipress - Grass
7. operating the multipress - Grass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. DESCRIPTION OF MACHINE COMPONENTS4-003 Multipress gearbox hole line drilling patternsThe standard vertical gearbox V21 can drill <strong>the</strong> following hole drilling patterns.See Illustration 4-003-01 for spindle spacing.Bore holes with gearbox in basic position- Bore holes for cabinet hinges that have <strong>Grass</strong>-specified hole pattern- Bore holes for visible cabinet hinges that have <strong>Grass</strong>-specified hole pattern- Bore holes for dowel baseplates with hole spacings of 32 mm- Bore holes for wing baseplates with hole spacings of 32 mm- Vertical dowel bore holesBore holes with gearbox swivelled 90˚- Bore holes in drawer front panels that have spacings of 32 mm or 64 mm for <strong>the</strong> <strong>Grass</strong> Zargen SlideSystems 6000 and 7000.- Bore holes in drawer back panels for <strong>the</strong> <strong>Grass</strong> Zargen Systems 6000 and 7000.(The pendulum stop is an accessory).- Drilling fastening holes for handle with hole spacings of 32, 64, 96 or 128 mm.- Bore holes for fastening hardware with hole spacings of 32 and 64 mm.- Bore holes for line borings with 32 mm spacings.- Bore holes to fasten drawer slide (cabinet members) with 32 mm spacing hole pattern- Vertical dowel holes for center bottomsThe vertical gearbox V22 can drill <strong>the</strong> following hole patterns:Gearbox is available on request.For <strong>the</strong> spindle spacings, see illustration 4-003-02The star in your cabinet33