7. operating the multipress - Grass

3. DESCRIPTION OF PRODUCTS3-006 “Extras „ and accessoriesVertical gearbox models- 21 spindles - Vertical gearbox that swivels 90˚, eccentric gear suspension with21 quick-change drill chucks, 4 spring-loaded hold-down devices in the gearboxand index guide 94196- Other gearbox variations are available upon requestMovement limitation control for the vertical bore head- Movement limitation control for the vertical bore head for the return stroke. 94200Position a: Drilling and insertingPosition b: Drilling onlyDepth gauge for the vertical bore head- The depth gauge allows a consistent and uniform drilling depthregardless of the workpiece thickness. 94202Horizontal bore head- The complete bore head with electric motor and pneumatic feed is located on thebearing shaft of the base frame; hold-down plate for clamping the workpieceduring drilling. 3 x 380V 50 Hz 94185*Horizontal gear models- 5-spindle gearbox with 5 quick-change drill chucks 94198- 7-spindle gearbox with 5 quick-change drill chucks 94354- Other gearbox variations are available on requestMovement limitation control for the horizontal bore head- The movement limitation control for the horizontal bore head for the return strokeadjusts to the movement path of a maximum of 6 different drill bit lengths. 94201Machine base- The Multipress base has a built-in tool drawer and adjustable feet. 94203Pendulum stop- The pendulum stop is used to drill the drawer’s back walls with the Zargen slidesystems 6000 and 7000 94339* The item number corresponds to the electrical voltage. Other voltages available on request.18The star in your cabinet