7. operating the multipress - Grass
7. operating the multipress - Grass
7. operating the multipress - Grass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. MAINTENANCE AND CARE9-001 Maintenance planMaintenance work should be done only after <strong>the</strong> machine has been safely turned off. That means: <strong>the</strong> mainswitch on <strong>the</strong> switchgear cabinet must be on 0 and <strong>the</strong> pneumatic air system has been disconnected.Daily:Before <strong>operating</strong> <strong>the</strong> machine: check all safety devices to make sure <strong>the</strong>y are complete and working properly.After <strong>the</strong> work is completed: Secure <strong>the</strong> machine against unauthorized use (use a padlock) and clean dirt,shavings and chips off <strong>the</strong> machine.Weekly, or as needed:Drain <strong>the</strong> filter-pressure reducer by disconnecting <strong>the</strong> machine from <strong>the</strong> pneumatic air system(semi-automatic drain).Monthly:Clean <strong>the</strong> guide bars and lubricate <strong>the</strong>m with commercial grease.Check <strong>the</strong> digital position indicator by test drilling. Make adjustments, as described in sections 8-101, 8-102and 8-201.Check to see if <strong>the</strong> side stops are operational. Clean, if necessary.Check <strong>the</strong> position of <strong>the</strong> insertion dies. Make corrections, as described in section 8-106.Yearly:The Multipress has proven its durability and reliability in many fatigue tests. In order to keep your Multipressrunning smoothly for many years, we recommend having <strong>the</strong> machine serviced by a experienced <strong>Grass</strong>Service Technician or by a trained <strong>Grass</strong> Distributor every 1 to 3 years.9-002 Care informationThe machine should be cleaned only after <strong>the</strong> main switch on <strong>the</strong> switchgear cabinet is turned off to 0 and<strong>the</strong> pneumatic air system has been disconnected.Clean <strong>the</strong> machine as needed. Vacuum or suction <strong>the</strong> wood shavings and sawdust. Clean with a soft drycloth. Do not use harsh cleaning substances such as acetone, thinners, gasoline or o<strong>the</strong>r similar solutions.Occasionally lubricate <strong>the</strong> non-enameled steel components with a lightly oiled cloth. Use only non-acid andnon-corrosive oil.104The star in your cabinet