Release 178 Notes - Nvidia's Download site!!
Release 178 Notes - Nvidia's Download site!! Release 178 Notes - Nvidia's Download site!!
Chapter 2: Release 178 Driver Issues Open Issues in Version 178.26Windows XP x86 IssuesThis section includes issues that occur under the Windows XP or Windows2000:Single-GPU Issues• The online Help does not include information about workstation features.• Rendering speed remains slow after closing resource‐intensive applications.• Maya 2009: driver versions and configurations need to be defined for theapplication in order to properly run in stereo.• SolidMX 2D– drawing data canʹt be moved smoothly.• KOMPAS‐3D V9 SP1 –the CAD software runs faster on a GeForce card whencompared to a Quadro card.• NVIDIA Control Panel‐>Workstation‐> Frame Sync: The View Status Pagedoes not detect which is the first and which is the second display attached tothe GPU.• Video color‐space range for DVI‐only 1 outputs is erroneously set to standardmode (16‐235) instead of extended mode (0‐255).A new detection feature to apply Standard CSC mode to TV outputs (includingNTSC, PAL, 480i, and 576i), included DVI‐only outputs by mistake.Note: The driver correctly applies extended mode to analog outputs, andstandard mode to TV outputs (including NTSC, PAL, 480i, and 576i).A future driver release will correct this and apply the extended‐mode color space toDVI‐only outputs.You can work around this issue by forcing either standard or extended mode asfollows:1 Launch regedit and determine the current primary display card bylooking inHKey_Local_Machine\Hardware\DeviceMap\Videoand note the GUID (global unique identifier assigned by Windows),which is the long string in brackets { } at the end of the entryʺ\device\video0ʺ.2 Look inHKey_Local_Machine\SYSTEM\CurrentControlSet\Control\Video\{GUID}\0000where {GUID} is the number derived from the previous step.1. “DVI-only” means only one display is connected, and it is to the DVI output.10 NVIDIA Corporation
Release 178 Version 178.263 Open the ʺ0000ʺ directory and create a new DWORD calledVMRCCCSStatus and give it a value of0x3 ‐ to force use of the standard YUV range of 16‐2350x1 ‐ to force use of the extended YUV range of 0‐255• Quadro FX 5600: The timings for high custom resolutions, such as 4096x1080,are incorrect until the NVIDIA Control Panel is opened.• Quadro FX 5600: The NVIDIA Control Panel custom resolution settingsbehave inconsistently.• Quadro FX 5500: ArchiCAD12–the application disables antialiasing due to“insufficient video card resources”• Quadro FX 5500: ArchiCAD12–Rotating Gradient fill while zooming iserroneous.• Quadro FX 4700 X2: When four displays are enabled, one of the displaysconnected to the second GPU flashes.• Quadro FX 4400/4000/3400/350, 3D Stereo: When using the Stereo Clonemode option, some graphics are missing from the right‐hand screen.• Quadro FX 3700: HiTec Lite‐T5400–there is a drop in performance.• Quadro FX 3500: Large FBOs are not drawn properly when using lowmemorygraphics cards.• Quadro FX 3700/1700/570: The graphics cards do not work as the secondaryGPUs.• Quadro FX 1500/1700/3700: I‐DEAS – memory errors occur when workingwith large assemblies• Quadro FX 1700, 3700 or 4600: There is video flickering, artifacts, and screencorruption when using VMR9 and GDI rendering simultaneously.• Quadro FX 1700/3700: dCoder 2.0 ‐ the application crashes when opening aQuickTime movie.• Quadro FX 1400: Cadence Allegro 16.0–UI performance is slow when usingOpenGL.Multi-GPU Issues• Dual Quadro FX 3700: MicroStation–when both cards are set up in Spanningmode, an application runtime error occurs.• [SLI]: With SLI mode enabled, the NVIDIA Control Panel‐>Workstation‐>View Status page does not the correct monitor connections.• [Multi‐GPU]: There is no application scaling when using glReadPixels() withGPU affinity.NVIDIA Corporation 11
- Page 1: NVIDIA Quadro ProfessionalDriversRe
- Page 5 and 6: NVIDIA Quadro Professional Drivers,
- Page 7 and 8: Quadro Professional Drivers, Releas
- Page 9 and 10: NVIDIA Quadro Professional Drivers,
- Page 11 and 12: NVIDIA Quadro Professional Drivers,
- Page 13: Release 178 Version 178.26Open Issu
- Page 17 and 18: Release 178 Version 178.26Not NVIDI
- Page 19 and 20: NVIDIA Quadro Professional Drivers,
- Page 22 and 23: C HAPTER 3: The Release 178 Driver
- Page 24 and 25: C HAPTER 3: The Release 178 Driver
- Page 26 and 27: : Known Product LimitationsSLI Conn
- Page 28 and 29: : Known Product LimitationsVideo Pl
- Page 30 and 31: : Known Product LimitationsNo Antia
- Page 32 and 33: : Known Product Limitations1 In the
- Page 34 and 35: A PPENDIX A: Mode Support for Windo
- Page 36 and 37: A PPENDIX A: Mode Support for Windo
- Page 38 and 39: A PPENDIX A: Mode Support for Windo
- Page 40 and 41: A PPENDIX A: Mode Support for Windo
- Page 42 and 43: A PPENDIX A: Mode Support for Windo
- Page 44: A PPENDIX A: Mode Support for Windo
- Page 48 and 49: A PPENDIX A: Mode Support for Windo
- Page 50 and 51: A PPENDIX A: Mode Support for Windo
- Page 52 and 53: A PPENDIX A: Mode Support for Windo
- Page 54 and 55: A PPENDIX A: Mode Support for Windo
- Page 56 and 57: A PPENDIX A: Mode Support for Windo
- Page 58: A PPENDIX A: Mode Support for Windo
<strong>Release</strong> <strong>178</strong> Version <strong>178</strong>.263 Open the ʺ0000ʺ directory and create a new DWORD calledVMRCCCSStatus and give it a value of0x3 ‐ to force use of the standard YUV range of 16‐2350x1 ‐ to force use of the extended YUV range of 0‐255• Quadro FX 5600: The timings for high custom resolutions, such as 4096x1080,are incorrect until the NVIDIA Control Panel is opened.• Quadro FX 5600: The NVIDIA Control Panel custom resolution settingsbehave inconsistently.• Quadro FX 5500: ArchiCAD12–the application disables antialiasing due to“insufficient video card resources”• Quadro FX 5500: ArchiCAD12–Rotating Gradient fill while zooming iserroneous.• Quadro FX 4700 X2: When four displays are enabled, one of the displaysconnected to the second GPU flashes.• Quadro FX 4400/4000/3400/350, 3D Stereo: When using the Stereo Clonemode option, some graphics are missing from the right‐hand screen.• Quadro FX 3700: HiTec Lite‐T5400–there is a drop in performance.• Quadro FX 3500: Large FBOs are not drawn properly when using lowmemorygraphics cards.• Quadro FX 3700/1700/570: The graphics cards do not work as the secondaryGPUs.• Quadro FX 1500/1700/3700: I‐DEAS – memory errors occur when workingwith large assemblies• Quadro FX 1700, 3700 or 4600: There is video flickering, artifacts, and screencorruption when using VMR9 and GDI rendering simultaneously.• Quadro FX 1700/3700: dCoder 2.0 ‐ the application crashes when opening aQuickTime movie.• Quadro FX 1400: Cadence Allegro 16.0–UI performance is slow when usingOpenGL.Multi-GPU Issues• Dual Quadro FX 3700: MicroStation–when both cards are set up in Spanningmode, an application runtime error occurs.• [SLI]: With SLI mode enabled, the NVIDIA Control Panel‐>Workstation‐>View Status page does not the correct monitor connections.• [Multi‐GPU]: There is no application scaling when using glReadPixels() withGPU affinity.NVIDIA Corporation 11