You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Resene</strong> Professional development programmeSpecialist coatingsFlooring – timber – parquet – particle board and cork, particularly Halls and Gymnasiums are bestcoated with <strong>Resene</strong> Polythane (D53) easily and quickly applied by lambswool mops. Moisturecure mustnot be sprayed. 1st coat on particle board waterborne sealer.Line marking is often needed. The lineal metre <strong>rates</strong> include layout and 1 coat 2 pack <strong>Resene</strong> Uracryl(RA56) gloss paints (typical dimensions and areas P53/54).<strong>Resene</strong> Tennis Court Coating (D303) is an acrylic silica modified court coating – 2 shades green andterracotta. 1 coat primer needed on asphalt followed by 2 coats. <strong>Average</strong> tennis court 260m 2 + 370m 2playing margin + 146LM markings.<strong>Resene</strong> Blacktop (D304) easily applied to renew asphaltic surfaces Black/Green/RedFire protection systemsCoatings that resist the spread of flame are categorised into ‘Fire indices’ (see attached list). Selectionof con<strong>for</strong>ming paints is simple and does not alter the cost of <strong>painting</strong>.Coatings that have ‘fire retarding’ properties usually promote an intumescent reaction to heat thatprovides a protective shield.<strong>Resene</strong> Fireguard (D39) is a pigmented waterborne coating that improves the hazard rating of groups 1and 2 building materials (plywood, timber, particle board etc.) It is applied in one coat over primers andbeneath topcoats such as <strong>Resene</strong> SpaceCote (D311). Generally specified in public building assemblyand egress area. Only available as a pigmented system.The rate of $9.20 to apply <strong>Resene</strong> Fireguard is added to the cost of any chosen waterborne system, <strong>for</strong>example the cost of priming, <strong>Resene</strong> Fireguard and 2 acrylic topcoats would be $14.10 + $9.20 per m 2 .Fire rated coatings are high build intumescent coatings used <strong>for</strong> the protection of steel against failurecaused by fire. The coatings are usually specified in time requirements, from 30 to 120 minutes andthe thickness of applied material provides the protective mechanism. Specialist technical advice isavailable from Altex Coatings (07-541-1221) and is recommended because contract requirementsrequire stringent producer statement con<strong>for</strong>mance. The application is generally by heavy duty airlessspray and the indicative <strong>rates</strong> exclude substrate priming (usually providing by others) and also excludedecorative (if called <strong>for</strong>) topcoats.Fire rated coatings are subject to a Producer Statement: fit <strong>for</strong> purpose.53
Change language