Average rates for painting - Resene
Average rates for painting - Resene Average rates for painting - Resene
Resene Professional development programmeThe rates for painting roofs do not include precleaning regimes and (c) and (d) in particular often needvery comprehensive preparation.Severe corrosion cells – typically red rusted respond really well to spot priming with Resene Armourzinc110 – the very high zinc content (approx 86%) provides excellent anodic protection. ‘Solventless’ epoxiesare easily applied with proper airless equipment. An output above 3 litres per minute @ 2600PSI (156bar) and tip sizes above 17 thou is necessary.Access and edge protectionPainters must provide safe working conditions when working on roofs. In addition to ladder safety, andharnesses, edge protection must be provided, which may need specialised scaffolding and barriers.Repainting roofs in good conditionTreat moss and mould withResene Moss and Mould KillerWash thoroughly using ReseneRoof and Metal Wash toremove any contaminants,mould etc. Lichen may need tobe scraped offSpot prime any bare areaswith Resene Galvo OneApply 2 coatsof Resene Hi-Gloor ReseneSummit RoofAlternativelyapply 2 coatsof Resene Hi-Gloor ReseneSummit RoofCoolColour 11To optimise the benefits of the Resene CoolColour topcoat use appropriate primer.47
Resene Professional development programmeExterior workRepaint roofs in good conditionSpot prime and apply 2 coats acrylic gloss measures flatoverall(a) galv corrugated iron(b) galv tray profile(c) decramastic tiles (low sheen)(d) clay tiles (include sealer coat)All applied by airless spray (wash down costs excluded)Prepare, remove rust, prime (up to 4% of gross area)and apply solventless epoxy hi-build – Alumastic – byHP airless @ WFT 250ums – 125ums DFT(a) galv corrugated iron(b) tray profile(wash down costs excluded)Clean, spot prime with adhesion primer and paint 2coats flooring paint to(a) concrete porches(b) timber porch flooring (TG particularly)Hour% factor0.180.240.240.380.160.18Measure$ rate labour/ materialsm 2 16.20m 2 22.50m 2 25.00m 2 41.00m 2 18.10m 2 28.800.24 m 2 16.50m 2 17.00Either 2 coats oil stain or acrylic low sheen to profileddektread decking ex 100mm with 5/10mm gaps,measured flat (cleaning, moss and mould treatment notincluded) 0.18 m 2 13.50exterior – repaintsCall 0800 RESENE (737 363), visit www.resene.co.nzor email us at advice@resene.co.nz48
- Page 6 and 7: Resene Professional development pro
- Page 8 and 9: Resene Professional development pro
- Page 10 and 11: Resene Professional development pro
- Page 12 and 13: Resene Professional development pro
- Page 14 and 15: Resene Professional development pro
- Page 16 and 17: Resene Professional development pro
- Page 18 and 19: Resene Professional development pro
- Page 20 and 21: Resene Professional development pro
- Page 22 and 23: Resene Professional development pro
- Page 24 and 25: Resene Professional development pro
- Page 26 and 27: Resene Professional development pro
- Page 28 and 29: Resene Professional development pro
- Page 30 and 31: Resene Professional development pro
- Page 32 and 33: Resene Professional development pro
- Page 34 and 35: Resene Professional development pro
- Page 36 and 37: Resene Professional development pro
- Page 38 and 39: Resene Professional development pro
- Page 40 and 41: Resene Professional development pro
- Page 42 and 43: Resene Professional development pro
- Page 44 and 45: Resene Professional development pro
- Page 46 and 47: Resene Professional development pro
- Page 50 and 51: Resene Professional development pro
- Page 52 and 53: Resene Professional development pro
- Page 54 and 55: Resene Professional development pro
- Page 56 and 57: Resene Professional development pro
- Page 58 and 59: Resene Professional development pro
- Page 60 and 61: Resene Professional development pro
- Page 62 and 63: Resene Professional development pro
- Page 64 and 65: Resene Professional development pro
- Page 66 and 67: Resene Professional development pro
- Page 68 and 69: Resene Professional development pro
- Page 70 and 71: Resene Professional development pro
- Page 72 and 73: Resene Professional development pro
- Page 76 and 77: Resene Professional development pro
- Page 78 and 79: Resene Professional development pro
- Page 80 and 81: Resene Professional development pro
- Page 82: In Australia:PO Box 924, Beenleigh,
<strong>Resene</strong> Professional development programmeThe <strong>rates</strong> <strong>for</strong> <strong>painting</strong> roofs do not include precleaning regimes and (c) and (d) in particular often needvery comprehensive preparation.Severe corrosion cells – typically red rusted respond really well to spot priming with <strong>Resene</strong> Armourzinc110 – the very high zinc content (approx 86%) provides excellent anodic protection. ‘Solventless’ epoxiesare easily applied with proper airless equipment. An output above 3 litres per minute @ 2600PSI (156bar) and tip sizes above 17 thou is necessary.Access and edge protectionPainters must provide safe working conditions when working on roofs. In addition to ladder safety, andharnesses, edge protection must be provided, which may need specialised scaffolding and barriers.Re<strong>painting</strong> roofs in good conditionTreat moss and mould with<strong>Resene</strong> Moss and Mould KillerWash thoroughly using <strong>Resene</strong>Roof and Metal Wash toremove any contaminants,mould etc. Lichen may need tobe scraped offSpot prime any bare areaswith <strong>Resene</strong> Galvo OneApply 2 coatsof <strong>Resene</strong> Hi-Gloor <strong>Resene</strong>Summit RoofAlternativelyapply 2 coatsof <strong>Resene</strong> Hi-Gloor <strong>Resene</strong>Summit RoofCoolColour 11To optimise the benefits of the <strong>Resene</strong> CoolColour topcoat use appropriate primer.47