Average rates for painting - Resene

Resene Professional development programmeResene Limelock (D809) provides many unique advances painting new cementitious surfaces and canbe applied to surfaces as soon as possible to achieve maximum benefits.1. Promotes early cure of fresh cementitious surfaces minimising downtime between the completion ofplastering and commencement of painting.2. White pigmentation increases the albedo of the system to retain moisture.3. Seals in free lime to protect against the unwanted appearance of lime staining.4. Good adhesion to fresh cementitious substrates.5. Provides an excellent base for a wide range of Resene coatings.And as a direct benefit, speeds up construction timeframes by eliminating curing times for cement,greatly reduces the potential for surface cracking common to plaster coatings and is the most costeffective sealer for painters!WaterproofingResene X-200 (D62) is an excellent and well proven waterproofing system for cement, plaster andconcrete blockwork.Apply in two coats over sealer, excepting that concrete blockwork requires three coats of Resene X-200.Application is almost as easy as conventional acrylics except that the spreading rate must be at therequired 5/7m 2 per litre. The preferred application is by roller (or airless followed by backrolling). Alwaysuse a short handled roller to ensure an angle of application that fully covers joints.Resene X-200 has a Resene Paints Limited guarantee as a waterproofing system, but paintersmust seek advice and specifications from a Resene representative prior to undertaking thework. Resene X-200 will cover cracks up to 1mm wide.Resene Thixalon 5 and Resene Flexicover E are similar waterproofing systems but are both elastomericvery high film build materials, and specialist advice should be obtained from Resene representatives.Is waterproofing an issue?NoYesApply 2-3 coats ofResene Sonyx 101Alternatively, apply2-3 coats of ReseneLumbersiderApply three coatsof Resene X-20031