Multi-Split Systems - McQuay

SLM Operating InstructionsSLM1. “ON/OFF” switch• Press to start the air conditioner unit.• Press again to stop the unit.2. Temperature setting• Set the desired room temperature.• Press button to increase or decrease the settemperature. Setting range are between 16°Cto 30°C (60°F to 80°F).3. Operation Modes• Press the “mode” button for select the type ofoperating mode.- Cooling Only :COOL, DRY, FAN- Heat Pump :AUTO, COOL, DRY, HEAT, FAN(AUTO mode is represented by bothCOOL andHEAT LED light on)4. Fan Speed selection• Press the button until the desired fan speed isachieved.AC-5300 (OPTIONAL)6. “Sleep” mode• Press button to activate the sleep function canonly be activated under “cool” or heating modeoperation. When it is activated under “cool”mode operation, the set temperature willincrease 0.5°C after 30 minutes, 1°C after 1 hourand 2°C after 2 hours. If it is actiaved under“HEAT” mode operation, the set temperaturewill be descreased 0.5°C after 30 minutes, 1°Cafter 1 hour and 2°C after 2 hours.7. Air Swing• Press button to activate the automatic air swingfunction.8. Sensor• Infra red sensor to receive signals from wirelesscontroller.9. LED Display• To display the set temperature (in °C) and timerdelay setting (in hours).10. Transmission source• To transmit signals to the air conditioner.5. Timer• Press the set button to select the switch timerof the air conditioner unit (the setting range isbetween 1 to 10 hours).20