Multi-Split Systems - McQuay

G11 Remote ControllerTemperature Setting• To set the desired roomtemperature, press the button toincrease or decrease the settemperature.• The temperature setting range isfrom 16°C to 30°C• Press both buttons simultaneouslyto toggle the temperature settingbetween °C and °FTurbo Mode• Press the TURBO button toachieve the required settemperature in a short time.On/Off Button• Press Once to start the airconditioner• Press again to stop the unitPersonalised Setting• Press and hold the button for 3s toinitiate personalized setting.• Set the individual setting e.g.MODE, SET TEMP or FAN SPEEDand leave for 4s to save• 2 groups of settings are allowed tostored in the handsetSleep Mode• Press the button to activate sleepmode. This function is availableunder COOL, HEAT & AUTOmode.• When it is activated in COOLmode, the set temperature will beincreased 0.5°C after 30mins, 1°Cafter 1 hour and 2°C after 2 hours.• When it is activated in HEATmode, the set temperature will bedecreased 1°C after 30mins, 2°Cafter 1 hour and 3°C after 2 hours.ON Timer Setting• Press the SET button will activatethe on timer function.• Set the desired on time bypressing the SET buttoncontinuously.• Press the CLR button to cancel theoff timer settingClock Time Setting• Press button + or - to increase ordecrease the clock time.Ionizer• Press the button to activate thenegative Ion function, which willrefresh the indoor air effectively.Fan Speed Selection• Press the button until the desiredfan speed is achieved.Operating Mode• Press the MODE button to selectthe type of operating mode.• For Cooling only unit, the availablemodes are: COOL, DRY & FAN.• For Heatpump unit, the availablemodes are: AUTO, COOL, DRY,FAN & HEAT.OFF Timer Setting• Press the SET button will activatethe off timer function.• Set the desired off time bypressing the SET buttoncontinuously.• Press the CLR button to cancel theoff timer settingAutomatic Air Awing• Press the SWING button toactivate the automatic air swingfunction.• To distribute the air to a specificdirection, press the SWING buttonand wait until the louver move tothe desired direction and press thebutton once again.19