6. Digital simulation in Alecsis - LEDA

More documents

Recommendations

Info

6. Digital simulation in Alecsis 91}}}// code activates at the edge of clock signal...In this example, wait command is sensitive to the clock signal, with the condition of a transition to '1' (ifaction parameter mode equals RisingEdge) or '0' (if mode equals FallingEdge). The appropriateedge of the clock activates the code that follows (omitted in the example above). At the end of the process, thecontrol is back at its beginning, and the execution stops again at wait command, waiting the appropriate clockedge.6.2.4. Predefined signal attributesAll signals, regardless of their data type, have a number of attributes, whose value can be accessed in aprocess. All attributes are of int type, and can be accessed using indirection operator -> (signal name istreated as a pointer, i.e. address in memory). Signal attributes are:− active -- 1 if the signal is active in the present moment, otherwise 0− event -- 1 if an event is currently happening on the signal, otherwise 0− quiet -- 1 if the signal is not processed in the present moment (!active), otherwise 0− stable --1 if the signal is not changing value (!event), otherwise 0− fanin -- number of processes sensitive to this signal− fanout -- number of drivers of this signal− hybrid -- 1 if the signal has also analogue aspect, otherwise 0It can happen that the signal is processed, but the result is the same value as it was before.Processed signal is active, while an event happened to it only when the new value is differentfrom the old one. The term sensitivity has already been explained, while the concept of driverswill be explained in the following section. The last attribute indicates the hybrid aspect of thepresent signal, that is the coupling of analogue elements (which can have effect on delaycalculations and other activities).Note: The indirection operator -> can be used without restrictions, since the members ofsignals-structures can be accessed using character '.', and the signal cannot be declared as apointer.Composite signals have attributes active, event, quiet, and stable. Attributes hybrid,fanin, and fanout are not allowed it the signal is not a scalar. Attributes active and event are obtainedas a result of or operation on attributes of all scalars of the signal (for example, a vector is active if at least oneposition is active). Attribute quiet is negation of active, and stable is negation of event.signal four_t v[4];...v[0]->fanin; // o.k.v->fanin; // error - composite signals cannot that attributeWe use attributes in the following example for detection of static hazard - simultaneousand opposite change of the inputs of an AND circuit).
92 Alecsis 2.3 - User’s manualmodule and2 (three_t in a,b; three_t out y) {action (double delay) {process (a,b) {if (a->event && b->event && a != b)warning ("static hazard at inputs of AND2 circuit");y
Page 2 and 3: 6. Digital simulation in Alecsis 85
Page 16: 6. Digital simulation in Alecsis 99

6. Digital simulation in Alecsis - LEDA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?