Viola M4BL User Manual - Astra Security Systems Ltd
Viola M4BL User Manual - Astra Security Systems Ltd Viola M4BL User Manual - Astra Security Systems Ltd
6.4 System SetupIn Setup Menu display, press ▲▼◄► to change the highlighted option to System,and then press ENTER to call up System Setup as shown.The System Setup allows the administrator to set the system time, time zone, timesynchronization, language, etc.The general operations are as below:• ▲▼◄► (Mouse: Left click)Press these buttons to select the items.• ESC (Mouse: Right Click)Press this button to escape from this screen, and return to Setup Menu display. Ifthe Save dialog is shown, press ENTER to exit and save, ESC (Mouse: RightClick) to exit without saving. Please note that if the selected language ischanged, the user will be asked to reboot the system for the newly selectedlanguage to take effect.Following is a brief description for each item and its specific operations:• Time Zone – press +/- buttons to select the time zone for the system. Pleaserefer to Appendix B for the time zone table.• Daylight Saving Time – press ENTER or +/- to check/uncheck this item. Thedefault value is set by selecting a different time zone, but the user maycheck/uncheck this item if the default setting is checked.- 42 -
• System Time –• Synchronization – time synchronized with TSP Server or not. PressENTER or +/- to check/uncheck this item. The default setting is “–” -unchecked.• TSP Server – TSP (Time Synchronization Protocol) server name if TimeSynchronization is enabled. The system will try to do time synchronizationwith the specified TSP server at the system preset interval. Please follow theText Input method described in Section 4.1 to modify this item.• Date – system date.Press +/- buttons to modify each of these items.• Time – system time. Press +/- buttons to modify each of these items.• Display Format – format used for the system time displayed on the lower-leftcorner of the main screen. Press +/- buttons to select the desired format.• Language – press +/- buttons to select the language for the system. Thelanguages supported include: English, Russian, Simplified Chinese,Spanish, Traditional Chinese, Polish, Turkish, etc.• Protection Key – the protection key for the remote access of the system. Pleasefollow the Text Input method described in Section 4.1 to modify these items.Note: This protection key will be used for authentication when any remote stationwants to connect with the system from Ethernet interface, either LAN orinternet. So, the same protection key must be entered to install the remotesoftware if it is to be used to access the system.- 43 -
- Page 5 and 6: Table of Contents1. Product Overvie
- Page 7 and 8: 1. Product OverviewThe H.264 digita
- Page 9 and 10: 2.2 Back Panel1. Video Input Connec
- Page 11 and 12: 8. Down/DEL Button (▼/DEL)Press t
- Page 13 and 14: 3. InstallationsThe installations d
- Page 15 and 16: 4. Main Screen And Basic Operations
- Page 17 and 18: 4.2 Login And LogoutThere are three
- Page 19 and 20: • ENTER (Mouse: )Press this butto
- Page 21 and 22: 5. Menu DisplayIn split-window disp
- Page 23 and 24: • ESC (Mouse: or Right Click)Pres
- Page 25 and 26: 5.3 Backup DeviceIn Menu display, p
- Page 27 and 28: 5.4 Software Upgrade (Administrator
- Page 29 and 30: 6. Setup (Administrator)In Menu dis
- Page 31 and 32: exit without saving.Following is a
- Page 33 and 34: settings will be copied to those of
- Page 35 and 36: for the motion detection of this ca
- Page 37 and 38: Press this button to escape from th
- Page 39 and 40: • ESC (Mouse: Right Click)Press t
- Page 41: • Setup System - to enable the us
- Page 45 and 46: • Net Mask - Net Mask for the IP
- Page 47 and 48: • Username - username if the SMTP
- Page 49 and 50: 80. Please follow the Text Input me
- Page 51 and 52: 7.1 Search By TimeThe screen for Se
- Page 53 and 54: Please select the backup device, an
- Page 55 and 56: Press these buttons to select the d
- Page 57 and 58: 7.4 Search Archived FilesThe screen
- Page 59 and 60: Following is a brief description fo
- Page 61 and 62: file to self-playback the correspon
- Page 63 and 64: 7.8 Playback For Archived FilesIn S
- Page 65 and 66: 9. Please go to Start->Setup->Contr
- Page 67 and 68: • In video window, right-click th
- Page 69 and 70: selected DVR. Click on any of these
- Page 71 and 72: • PCIBM PC/AT compatible with Int
- Page 73 and 74: Appendix A - SpecificationsSystemVi
- Page 75 and 76: Appendix B - Time Zone TableTime Zo
- Page 77 and 78: Appendix C - Recording TableNTSC Re
- Page 79 and 80: Appendix D - MS-Windows UtilitiesTh
- Page 81: M4V/H.264 to AVI Conversion Utility
6.4 System SetupIn Setup Menu display, press ▲▼◄► to change the highlighted option to System,and then press ENTER to call up System Setup as shown.The System Setup allows the administrator to set the system time, time zone, timesynchronization, language, etc.The general operations are as below:• ▲▼◄► (Mouse: Left click)Press these buttons to select the items.• ESC (Mouse: Right Click)Press this button to escape from this screen, and return to Setup Menu display. Ifthe Save dialog is shown, press ENTER to exit and save, ESC (Mouse: RightClick) to exit without saving. Please note that if the selected language ischanged, the user will be asked to reboot the system for the newly selectedlanguage to take effect.Following is a brief description for each item and its specific operations:• Time Zone – press +/- buttons to select the time zone for the system. Pleaserefer to Appendix B for the time zone table.• Daylight Saving Time – press ENTER or +/- to check/uncheck this item. Thedefault value is set by selecting a different time zone, but the user maycheck/uncheck this item if the default setting is checked.- 42 -