Force measuring pin, type 0201 - Brosa AG

Force measuring pin, type 0201For the precise force measurement at bearing pointsBROSA force measuring pins are made of high-strengthstainless steel and meet the highest requirements.Depending on the application-specific conditionsthe BROSA force measuring pins are designed andproduced according to different, partly patented designconcepts. High measurement accuracies are ensuredfor a long time by considering the exact installationsituation from the construction to the calibration of thesensors.Applications• Sheaves• Rope endpoint• Carriage forces• Machine constructionFeatures• Customer-specific design• Integrated amplifier• High overload capacity• Designed for endurance strength• Temperature compensated• High EMC resistance

Force measuring pin, type 0201Technical dataAccuracyMeasurement range≤ 0.5 % FS10 kN to 5000 kNMaximum load ≥ 150 %, optional 300 %Breaking load ≥ 300 %, optional 500 %Linearity errorHysteresisReproducibility≤ 0.5 % FS≤ 0.5 % FS≤ 0.1 % FSTemperature range -40 to +80 °CTemperature coefficientSupply voltageOutput signal≤ 0.0035 % / K9 to 36 VDC4 to 20 mA, optional redundantCANopen, optional safetyPROFINET, optional PROFIsafeProtection class IP 67, optional IP 69K, according to DIN EN 60529Interference immunityEmission DIN EN 55025Climate tests DIN EN 60068-2Vibration resistance DIN EN 60068-2Electrical connectionsElectrical protection classesMaterialUp to 200 V/m HF, 100 mA BCIaccording to ISO 11452, DIN EN 61000-4, ISO 7637M12x1, 4-pinsReverse polarity protection, overvoltage protectionand short- circuit protectionStainless steelOptionsSafety classification acc. to DIN EN ISO 13849-1 PL c, PL d (PL e)Explosion protectionATEX Ex i, Ex dPassive designOutput ~ 1 mV / VISO 9001:2008ISO 14001:200494/9/EG© BROSA AG • Dr. Klein Straße 1 • D-88069 Tettnang • Fon 0049 (0)7542 93 35 0 • Fax 0049 (0)7542 93 35 35 • info@brosa.net • www.brosa.netThe indicated data only serve as product description and are not assured feature of the product in the legal sense. The right to carry out technical changes is reserved.Edition 2012/11