Datacomtools.comTM

SignalTEK & SignalTEK-FO
SIGNALTEK provides a technically innovative method to test and document performance
of voice, data, and VoIP applications for cabling installers and network technicians. It
tests the link’s ability to support applications by transmitting Ethernet packets on wire
and measuring the link performance according to IEEE802.3ab Gigabit Ethernet standard. By monitoring
transmitted and received data packets, it can report BERT (Bit Error Rate Test) for the link. It uses the latest
generation of Gigabit Ethernet technology to provide the best performance to this new class of testers.
- Qualify, Store, Print
- Gigabit Performance Qualification- Test to IEEE 802.3 standards
- Selectable Performance Testing- qualify performance of Data, Voice over IP, and IP Video applications
- Performs Gigabit Ethernet link establishment test in 10 seconds
- Data monitoring to detect intermittent network problems
- Internal and USB Data Storage- 20,000 tests internally or unlimited on USB Device
- Prints Easy-to-Read Pass/Fail Qualification Reports
The SIGNALTEK-FO is the first and only tester to qualify both copper and fiber-optic cabling to IEEE 802.3
standards. All in one unit that’s less than the price of an optical test set.
(33-974) SignalTEK Kit
With its compact design and soft over-molded sides, the SIGNALTEK-FO fits comfortably in your hands. The
easy-to-navigate user interface enables multimedia Gigabit qualification with multimode and single mode
capability. You can also perform Bit Error Rate testing and decibel (dB) loss measurements of optical links.
Plus, storing and printing qualification reports for copper and fiber jobs are simple using internal memory or
USB thumb drives.
In addition to cable performance qualification, SIGNALTEK can be configured to run for several minutes or
hours at a time. While stress testing critical network links, SIGNALTEK transmits hundreds of Gigabits of
information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK
to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation
of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable
testers.
(33-983) SignalTEK-FO Kit
33-974 SIGNALTEK Kit $1249.00
33-981 SIGNALTEK-FO with (2) 850nm modules $2205.00
33-982 SIGNALTEK-FO with (2) 13X0nm modules $2590.00
33-983 SIGNALTEK-FO with (2) 850 & (2) 13X0 modules $2879.00
LanTEK II Series Cable Certifier
LanTEK II offers the best speed, performance and price available today. Nine second Cat 5e and 14 second
Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing that’s more than 4x faster than
other systems make LanTEK II the ultimate copper certification platform. The patented universal adapter
systems lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the
need for proprietary permanent link adapters.
- Models ranging from 350 MHz - 1000 MHz for Cat 6/ISO E through Cat 7A/ISO FA certification.
- High speed testing saves time and money
- Most internal memory available - store over 1700 Category 6/ISO E tests with graphs
- Patented testing method - eliminate expensive permanent link adapters & test w/patch cords for installation
- Fast fiber testing with FiberTEK® FDX - the first dual wavelength, bidirectional fiber certification tool
- 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
- 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
- 18 hour battery life with self calibrating “fuel gauge” for accurate capacity readings.
33-991 LanTEK II-350: TIA/EIA Cat6, ISO Class E certifier with Cat6 Adapters $6415.00
33-992 LanTEK II-500: TIA.EIA Cat6a, ISO Class E^Certifier with Cat6a Adapters $6907.90
33-993 LanTEK II-1000: TIA/CIA Cat7A, ISO Class F/F^Certifier with Cat6A Adapters $7895.00
48
(33-991) LanTEK II-350 Kit
LANTEK10GBKIT
TM
Datacomtools.com
Accessories for the LanTEK II Series Cable Certifier
LANTEK10GBKIT LanTEK Alien Crosstalk kit $1995.00
33-990-BP01 Lithium Ion Battery for LanTEK II $215.00
0012-00-0656 Category 6A/Class Ea Universal channel/Permanent Link Adapter $133.13
0012-00-0629 Category 6/Class E Universal Channel/Permanent Link Adapter $90.63
6011-50-0001 Replacement Category 6A F/FTP Patch Cord $40.25
33-990-PS01 Power Supply w/universal plugs US/EU/UK. 110-124VAC input, 12VDC output $36.70
33-990-TS01 Replacement Talk Set for LanTEK I/II Pair $25.00
33-990-DC01 USB Cable Mini USB Device to standard USB boot $22.00
33-990-CC01 Carrying Case for LanTEK adapters. Accommodates up to 8 adapters with room $140.05
for patch cords and other accessories
33-990-CC02 Small Carrying Case for LanTEK adapters. Accommodates up to 8 adapters with $95.35
TERA connectors and two TERA patch cords.
1019-00-1100 CAT7/ISO-F NEXANS GG-45 Testing Kit includes permanent/channel link adapters
$835.00
with TERA connectors and two TERA patch cords.
1019-00-1105 CAT7/ISO-F TERA Testing Kit includes permanent/channel link adapters with $390.00
TERA connectors and two TERA patch cords
1019-00-0343 Coax Testing adapter kit for ANSI/SCTE 74 2003 cable TV drops up to 100 or
300 feet (BNC Connector)
$540.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply