Datacomtools.comTM

MRJ21 Connector Systems
The MRJ 21 Connector System Solution is a high-density, high-performance, modular copper
cabling system. AMP Netconnect’s matched powersum 24-pair cabling and connector
solution provides a variety of applications to up to 12 ports with a single cable. This solution
supports any plug and play environment including data centers and zone cabled or open office environments.
When utilizing AMP Netconnect’s PC board mounted solution, the MRJ 21 enables much higher port density
than the common Modular plug/jack interface, which can significantly reduce active port costs.
- MRJ 21 provides an application independent copper platform for applications today and into the future
- including Gigabit, VoIP & powered Ethernet.
- The small size of the MRJ 21 connector and cabling reduces cable bulk in pathways and spaces, enabling
much higher port counts in a smaller space.
- Factory termination and testing of the cassettes and patch panels provide assurance of pluggable perfor
mance on site. This enables rapid installation or MACs with pre-tested quality.
- The modularity of this solution significantly reduces time to install or migrate from a 10/100BASE-T 2-pair
platform to a Gigabit Ethernet 4-pair platform. Upgrading is as simple as unplugging one cassette and
plugging in the new one. The same cable is re-usable.
- Cassettes and patch panels break out high performance 24-pair solutions to the appropriate wiring patterns
for standards based 10/100BASE-T, Gigabit Ethernet, and other applications.
- Common cable assembly lengths provide readily available, pluggable solutions, speeding implementation.
MRJ21-MRJ21
MRJ21 Cassettes
- High-performance copper cabling solution
- High-density, small form factor connectivity
- Factory terminated and tested
- Modular, pluggable design
- 6-Port cassettes support applications that use 4 or less pairs including 10BASE-T, 100BASE-T & 1000BASE-T
- 12-Port cassettes support applications which use two or fewer pairs including 10BASE-T and 100BASE-T
- Blank adapter plate for MRJ21 (1479451-1) panel only - Do no use 1777046-1 with optical fiber enclosures
MRJ21-RJ45 Hydra
1479459-1 MRJ21 Cassette w/6 Ports, 10/100/1000BASE-T applications, & 4 pairs per port $56.80
1479452-1 MRJ21 Cassette w/12 ports, 10/100BASE-T applications, & 2 pairs per port $56.80
1777046-1 MRJ21 Blank Cassette $10.65
1479451-1 1479451-1 MRJ21 Cassette Panel - Accepts up to three (3) MRJ21 Cassettes $21.90
Cable Support Bars
- Mounts to the back of 19” racks
- Designed to provide additional cable support and routing control behind 19” racks and panels
- MRJ21 slotted manager bar for easy tie down
- Horizontal and vertical mounting option for MRJ21 tie down bar
557548-1 Standard Support Bar - 5” Depth $14.75
1933352-1 MRJ21 Cable Manager Bar - 6” Depth $31.85
1933352-2 MRJ21 Cable Manager Bar - 9” Depth $34.95
1933352-3 MRJ21 Cable Manager Bar - 12” Depth $36.95
1933352-4 MRJ21 Cable Manager Bar - 16” Depth $39.60
MRJ21 Patch Panels
- High-performance copper cabling solution
- High-density, small form factor connectivity
- Factory terminated and tested
- Modular, pluggable design
- 4-Pair Patch Panels support applications which use 4 or less pairs: 10BASAE-T, 100BASE-T & 1000BASE-T
- 2-Pair Patch Panels support applications which use 2 or less pairs including 10BASE-T, & 100BASE-T
1777029-1 Patch Panel, 1U w/24 Ports, 4 MRJ21 Connections (back), Non-AMPTRAC $300.40
1777029-2 Patch Panel, 1U w/24 Ports, 4 MRJ21 Connections (back), AMPTRAC Enabled $292.75
1435971-1 Patch Panel, 1U w/48 Ports, 8 MRJ21 Connections (back), Non-AMPTRAC $370.79
1777041-1 Patch Panel, 1U w/48 Ports, 8 MRJ21 Connections (back), AMPTRAC Enabled $445.00
1777052-1 Angled Patch Panel, 1U w/48 Ports, 8 MRJ21 Connections (back), Non-AMPTRAC $370.79
1777053-1 Angled Patch Panel, 1U w/48 Ports, 8 MRJ21 Connections (back), AMPTRAC Enabled $440.00
1435965-1 Patch Panel, 1U w/48 Ports, 4 MRJ21 Connections (back), Non-AMPTRAC $300.40
1777042-1 Patch Panel, 1U w/48 Ports, 4 MRJ21 Connections (back), AMPTRAC Enabled $345.00
1777040-1 Label Holder Panel (labels sold separately) $33.50
1777054-1 Label Holder Angled Panel (labels sold separately) $49.25
22
TM
Datacomtools.com
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply