Maxwell SV Getting Started: A 2D Magnetostatic Problem - LES

More documents

Recommendations

Info

Notice The information contained in this document is subject to change without notice. Ansoft makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Ansoft shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information which is protected by copyright. All rights are reserved. Ansoft Corporation Four Station Square� Suite 200� Pittsburgh, PA 15219� (412) 261 - 3200 Microsoft ® Windows ® is a registered trademark of Microsoft Corporation. UNIX� is a registered trademark of UNIX Systems Laboratories, Inc. Maxwell� is a registered trademark of Ansoft Corporation. © Copyright 1993-2002 Ansoft Corporation
Printing History Getting Started: A 2D Magnetostatic Problem New editions of this manual incorporate all material updated since the previous edition. The manual printing date, which indicates the manual’s current edition, changes when a new edition is printed. Minor corrections and updates which are incorporated at reprint do not cause the date to change. Update packages, which may contain additional and/or replacement pages for you to merge into the manual, may be issued between editions. Pages that are rearranged due to changes on a previous page are not considered to be revised. Edition Date Software Revision 1 May 2001 8.1 2 November 2002 9.0 iii
Page 1: November 2002 Maxwell ® 2D Student
Page 5 and 6: Typeface Conventions Getting Starte
Page 7 and 8: Table of Contents 1. Introduction .
Page 9 and 10: Getting Started: A 2D Magnetostatic
Page 11 and 12: Introduction This guide is a tutori
Page 17 and 18: Creating the Project This guide ass
Page 19 and 20: Create a Project Directory Getting
Page 21 and 22: Save Project Notes Getting Started:
Page 23 and 24: Overview of the Executive Commands
Page 25 and 26: Creating the Model In the last chap
Page 27 and 28: Access the 2D Modeler Use the 2D Mo
Page 29 and 30: The Solenoid Model Getting Started:
Page 31 and 32: Change the Drawing Size Getting Sta
Page 33 and 34: Create the Geometry Getting Started
Page 35 and 36: Draw the Core Use the Object>Polyli
Page 39 and 40: Exit the 2D Modeler To save your mo
Page 41 and 42: Setting Up the Model Now that you h
Page 43 and 44: Assign Copper to the Coil Getting S
Page 45 and 46: Define the Minimum and Maximum Valu
Page 47 and 48: Assign Neo35 to the Core Getting St
Page 51 and 52: H B 438 1.01 517 1.08 597 1.11 716
Page 53 and 54:
Getting Started: A 2D Magnetostatic
Page 55 and 56:
Page 57 and 58:
side of the window. The geometric m
Page 59 and 60:
Generating a Solution Now you are r
Page 61 and 62:
Solver Choice Getting Started: A 2D
Page 63 and 64:
Viewing Convergence Data Getting St
Page 65 and 66:
Viewing Final Convergence Data If c
Page 67 and 68:
Viewing Statistics Getting Started:
Page 69 and 70:
Analyzing the Solution Now that you
Page 71 and 72:
Post Processor Screen Layout Gettin
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Exit the Post Processor To exit the
Page 79 and 80:
A adaptive analysis 5-3 Ansoft soft
Page 81 and 82:
Solutions 6-2 Solve 5-4 Solver 3-2
Page 83 and 84:
Plot 6-6 Plot Force 5-8 plots conve
show all

Maxwell SV Getting Started: A 2D Magnetostatic Problem - LES

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?